STRINGTABLE
LANGUAGE 9, 1
{
1, "&OK"
2, "&Cancel"
3, "&Abort"
4, "&Retry"
5, "&Ignore"
6, "&Yes"
7, "&No"
8, "&Close"
9, "&Help..."
23, "Close this dialog."
27, "Error"
28, "Warning"
32, "Yes to &All"
33, "No to All"
34, "&Syntax..."
35, "Continue"
36, "Change..."
37, "rus"
38, "English/"
39, "English"
129, "\nCIR\nCIR\nCIR Files (*.cir)\n.cir\nSchematic.Document\nCIR"
130, "\nCKT\nCKT\nCKT Files (*.ckt)\n.ckt\nSpice.Document\nCKT"
131, "\nLBR\nLBR\nLBR Files (*.lbr)\n.ckt\nLibrary.Document\nLBR"
132, "\nMDL\nMDL\nMDL Files (*.mdl)\n.mdl\nModel.Document\nMDL"
150, "\nG2D\nG2D\nG2D Files (*.g2d)\n.ckt\nGraph 2D.Document\nG2D"
151, "\nMCL\nMCL\nMCL Files (*.mcl)\n.ckt\nMonte Carlo.Document\nMCL"
152, "\nG3D\nG3D\nG3D Files (*.g3d)\n.ckt\nGraph 3D.Document\nG3D"
154, "\nFFT\nFFT\nFFT Files (*.fft)\n.ckt\nfft.Document\nFFT"
161, "\nPFM\nPFM\nPFM Files (*.pfm)\n.ckt\nPerformance.Document\nPFM"
190, " "
210, "      .\n  "
211, "      .\n  "
219, "    \nCurrents"
220, "    \nPowers"
222, "     \nConditions"
224, " "
225, " "
226, " "
227, " "
228, " "
229, " "
230, " "
231, " "
232, " "
233, "  "
234, " H "
237, " "
238, " "
239, " "
240, " "
241, "  "
258, "%W    .  ."
259, "E %s ."
263, "   -  ,  \n    "
264, "  "
296, "     .\nCleanup"
302, ":      .\nNo:   .\n :   ."
314, "            .\nApply Display Attributes"
334, "        .\nPrint values"
337, "            "
375, "   ,     "
791, "Schematics"
792, "SPICE Files"
794, "Analysis Plots"
795, "3D Plots"
796, "Monte Carlo Histograms"
797, "Performance Plots"
798, "Status Bar"
799, "Go To Function"
800, "Go To X"
801, "Go To Y"
807, "%E '%s'     "
808, "%E .    '%s'  %s   %s\n%s"
809, "      Opamp power supplies added."
810, "%E '%s'        ."
858, "Globals"
901, "&Monte Carlo"
902, "&Scope"
903, "&Probe"
912, "&Vertical"
913, "&Horizontal"
914, "Dynamic AC"
915, "Dynamic DC"
916, "Find Component..."
960, "Fourier"
999, "   ,  "
1001, "  "
1002, "      "
1003, "     "
1004, ",     "
1005, ",     "
1120, "    .\nKey ID"
1121, "   Micro-Cap,  ,      R.\nStatistics"
1122, "       .\nPrint Active Window"
1127, "%E "
1128, "%E   MC%d,        MC%d"
1226, "    "
1310, "%EAn        . "
1311, "%E%s\nNo       ."
1312, "%E            LM."
1313, "%ELM      Equates."
1348, "           "
1349, "          "
1350, "    "
1363, "  ."
1368, "   ."
1369, "   . "
1371, "      "
1372, "    ."
1377, "    "
1378, "       "
1379, "  PWL   Excel  CSV."
1438, "       /   ."
1439, "      /."
1441, "  ,          .."
1447, "       ."
1448, "        . "
1449, "       . "
1450, "    . "
1451, "        . "
1452, "        . "
1453, "       ."
1454, "    ."
1455, " ,    . ,  .   Defines the temperature at which the analysis is run. Comma separated list."
1456, " ,    . ,  . "
1460, " ,    . "
1461, "     ."
1462, "      ."
1532, ""
1533, "  "
1534, "-."
1535, ""
1536, " "
1537, ""
1538, " "
1539, ""
1540, "  "
1554, "   MC12      .\n    ."
1559, "       /   ."
1587, " ,    ,   ."
1593, ",      .\n   "
1614, "   "
1615, "     "
1616, "Sets the color, voltage, current, resistance, and capacitance of the LED."
1622, "  (T,G,Meg,K,m,u,n,p,f) )     X "
1623, "  (T,G,Meg,K,m,u,n,p,f) )     Y "
1624, " (, ...  .)     X "
1625, " (, ...  .)     Y "
1626, "  ,     ."
1627, "  ,      ."
1635, "    ."
1654, "    ."
1655, "    ."
1656, "  "
1657, "    "
1658, "  "
1659, "   "
1660, "   "
1661, "   :  ((expr))."
1662, "  : im(ffts(expr))."
1663, " : ((expr))."
1664, " : ph(fft(expr)."
1665, ",    THD, IHD, HARMAN, DB(HARMAN)."
1670, "      -"
1671, "      -"
1672, "        "
1673, "     "
1674, "  ,       ."
1675, "     = 1 / (   -   )."
1677, "     .      ,   ."
1679, "   ,      ."
1681, "    ."
1728, "                "
1729, "   (Browse, Search)     "
1730, "   (Browse, Search)    "
1731, "   (Browse, Search)     "
1732, "   (Browse, Search)     "
1733, "     "
1734, "     "
1735, "   "
1736, "     "
1737, "     "
1738, "     "
1739, "     "
1740, "        "
1741, "       "
1742, "  ."
1743, "      ."
1744, "     ."
1745, "     ."
1748, " ,     ."
1749, "   ,  ."
1750, "     "
1751, "     "
1752, "      "
1753, "    "
1755, "        "
1756, "      ."
1757, "      ."
1780, "   "
1790, " ,      ."
1800, "        .\nFind  "
1833, "          "
1834, "    ,      "
1835, " ,      "
1836, " ,     ,    "
1837, "          "
1838, "   - ,      "
1839, " ,     ,    "
1840, "       "
1841, "           "
1842, "   -  ,     "
1843, " ,      ,    "
1844, "       "
1845, "      "
1846, "     "
1847, "     "
1848, "      "
1853, "         "
1854, "     "
1859, "       ."
1860, "      "
1861, "       ."
1862, "    "
1863, "               "
1865, "      "
1866, "  ,       "
1867, "  ,    "
1868, "%E     %s      .\n   ?"
1869, "%E     \n        "
1870, "%W  ,         ?"
1874, "         %"
1875, "        "
1876, "   ()        "
1877, "       "
1878, "          "
1880, "         "
1881, "         "
1882, "         "
1883, "         "
1884, "       "
1885, "       .  %s   ."
1910, "     ."
1911, "     ,      .             ."
1936, "   "
1937, "    "
1938, "   "
1939, "    "
1940, "   "
1941, "    "
1942, "     ."
1943, "    "
1944, " ,     "
1945, "    "
1946, "       "
1947, "      "
1948, "     "
1949, "    lot#     LOT  "
1950, " ,     LOT"
1951, "   LOT        "
1952, "     DEV       ."
1953, "   DEV    "
1954, "   DEV   "
1955, "    #lot     DEV  "
1956, " ,     DEV"
1957, "   DEV        "
1958, "           "
1959, "         "
1960, "   ,    "
1961, "   "
1965, " ,        "
2016, "            ."
2017, " ,     "
2039, ""
2041, "Browse"
2042, "Compress"
2045, ""
2051, "Search"
2052, " "
2053, ""
2054, "Memo "
2055, ""
2056, "Shape "
2057, "Definition "
2058, "Memo"
2059, ""
2100, ""
2101, " "
2102, "   "
2103, "  "
2104, " "
2105, " "
2106, "  "
2107, " "
2110, " "
2111, "   "
2112, "   "
2113, "   "
2114, "  "
2115, " "
2116, "   "
2118, " "
2119, "  "
2120, ""
2121, "   "
2122, ""
2123, ""
2124, " "
2125, ""
2126, ""
2127, " "
2128, "  "
2129, " "
2130, " "
2131, "  "
2132, "    Dynamic AC"
2133, ""
2134, "/"
2135, "  "
2136, " 0"
2137, " R"
2138, " F"
2139, " 1"
2140, " X"
2141, " Z"
2142, "  "
2143, ""
2144, "  "
2145, " "
2146, ""
2147, " "
2150, ""
2151, "  "
2152, ""
2153, "  "
2154, " "
2155, "  "
2156, " "
2157, "  "
2158, "  "
2159, " "
2160, "  "
2161, " "
2162, " 1"
2163, " 2"
2164, " 3"
2165, " 4"
2166, " 5"
2167, " 6"
2168, " 7"
2169, " 8"
2170, " 9"
2171, " 10"
2172, " "
2173, " "
2174, " "
2175, "   "
2176, "  "
2177, "  "
2204, "   ."
2205, "       ."
2265, "/   "
2266, "  n-    . N -   ."
2300, "       ,   ."
2301, "     ."
2302, "     ."
2303, "     ."
2304, "    ."
2305, "  ,      ."
2306, "      ."
2309, "         ."
2311, "    (F2)."
2312, " IM2. (  2- )"
2313, " IM3. (  3- )"
2315, "    F1+F2      IM2."
2316, "    F1-F2      IM2."
2317, "     2*F2-F1      IM3."
2318, "     2*F2+F1      IM3."
2319, "     2*F1-F2      IM3."
2320, "    2*F1+F2      IM3."
2321, "      ."
2323, "    F2      IM2  IM3."
2324, "  IM2, IM3  H1  1.0."
2325, "   ,   H1   1     =1 ."
2326, "   LO,     ,  FL"
2327, "   LO,     ,   FL."
2328, " ,    H1   IM2,        ,  1  2."
2329, " ,    H1   IM3,        ,  1  3."
2349, "  ,       ."
2351, "        X."
2352, "        X."
2353, "           X."
2354, "        X."
2355, "         X."
2356, "  ,      X  Y."
2357, "  ,      X  Y."
2365, "        ."
2366, "       ."
2370, " THD      Y."
2371, " THDN      Y."
2372, " SINAD      Y."
2373, " SNR      Y."
2374, "         Y."
2375, "   = H1 / VIN      Y."
2376, "  H1      Y."
2378, "        Y."
2380, "       Y."
2381, "       Y."
2383, "        X."
2384, "  dBm     X."
2385, "        X."
2386, "       Y."
2387, "        Y."
2388, "  dBm     Y."
2389, "        Y."
2390, "      ."
2391, "     ."
2400, "     ,      Y."
2401, "     ,    Designator()  Y."
2402, "     ,    Show As ()    Y."
2404, "     ( )."
2405, "        ."
2406, "     ,    Show As     X."
2447, "  ,        ."
2448, "       ."
2449, "        ."
2450, "  (T, G, Meg, K, m, u, n, p, f)  ."
2451, "    ."
2452, "           ."
2453, "      ."
2454, "        ."
2561, "      ."
2562, "    ."
2563, "  ,  Micro-Cap    .     ."
2564, "            ."
2680, "%W PSS        .\n      %d.    ."
2800, "     ."
2801, "      ."
2802, "    ."
2803, "     ."
2804, "     ."
2805, ".    ."
2806, "    ."
2807, " .    ."
2808, "        ."
2809, " ,    ,      ."
2810, "     ."
2811, "       ."
2812, "  .       ."
2813, "       ."
2841, "     ."
2903, "    "
2904, "   SPICE"
2905, "    "
2999, "  ,   .\nBF>100   ,   BF  100."
3000, "         ,   ."
3002, " "
3003, " .        "
3004, "    "
3005, "    "
3007, "  .   "
3009, "      "
3010, "   MOSFET     "
3011, "    "
3012, "   "
3013, "    "
3014, "    "
3015, "       subckt"
3016, "    "
3017, "  "
3018, "    "
3019, "       "
3021, "      "
3022, "  "
3023, "         "
3024, "         "
3025, "       "
3027, " IBIS-   ,      IBIS"
3028, "    "
3029, "    "
3030, "    ,   (Part),  (Value) /  (Model)"
3031, " ,   "
3032, " -  ,     (AC)"
3034, " -    ,     (AC)"
3036, " -  ,       (DC)"
3037, " WAV-,   ."
3039, " %s .   %s             "
3040, "          "
3055, "-   .  - [Trigger = {}] t1, v1 t2, v2... tn, vn"
3056, "      "
3057, "    "
3058, "   "
3059, "   "
3060, "   "
3061, "   "
3062, "   "
3063, "   "
3064, "  "
3065, "  "
3066, "   "
3067, " "
3068, " "
3069, "    "
3070, "    "
3071, "   "
3072, "   "
3073, "  "
3074, "     "
3075, "   1/.  -     "
3076, "       "
3077, "   "
3078, "   "
3079, "   "
3080, "   "
3081, "      "
3082, "  "
3083, "      "
3084, "  "
3085, "  "
3086, "  "
3087, "  "
3088, "   "
3089, " "
3090, " "
3091, " "
3092, "     "
3093, "      "
3094, "   "
3095, "   "
3096, "    .    > 0,    "
3097, "  "
3098, "   "
3099, "    50%   "
3100, "  "
3104, "\nSyntax: <value> [LOT[/#][/GAUSS|/UNIFORM|/WCASE]=[<tol>[%]] | [-<low>%,<high>%] ]\nExample: 10 Lot=10%\nExample: 10 Lot= -20%,80%"
3105, "\nSyntax: <value> [LOT[/#][/GAUSS|/UNIFORM|/WCASE]=[<tol>[%]] | [-<low>%,<high>%] ] [DEV[/#][/GAUSS|/UNIFORM|/WCASE]=[<tol>[%]]\nExample: 10 Lot=10% Dev=20%"
3106, "      ."
3108, "          (,  , )."
3170, "    "
3171, "    "
3180, "   ."
3181, "    ."
3182, "     .  -   ,    ."
3184, " ( 0,0  1,0)     (  PWL),     ."
3371, "       .\nOperating Point Methods"
3402, "   () "
3403, "       "
3404, "     "
3405, "     "
3406, "      ,   "
3407, "      , ,  "
3408, "      , ,  "
3409, "      .       ."
3410, "    ,              ."
3415, "    ,        ."
3416, "  , ,       "
3417, "  , ,       "
3418, "  , ,       "
3423, "      ."
3424, "     ,   ,        ."
3425, "    . ,       ."
3426, "    ,     ."
3427, "     ,           ."
3428, "     ,   ,        ."
3450, "  ..."
3451, " "
3452, " "
3453, "  "
3454, "..."
3455, "  ..."
3456, " ...."
3502, ",       ."
3503, ",         ."
3504, " ,      ."
3620, "%W ,    ?"
3804, "        .\nCut   "
3952, "."
3961, "      \nEdit    "
3962, "   ."
3963, "        ."
3964, "            ,  ."
3965, "   path    ."
3966, "       ."
4052, "%E   2 ."
4101, "     ."
4103, "    ."
4105, "    ."
4107, "   ."
4115, "      ."
4117, " X"
4118, "   ."
4119, "       ."
4120, "       ."
4200, "        .\nGo To Function"
4240, "   .   ,   .\\  lr10"
4250, "   .   ,   .\nData Mode"
4251, "   .   ,   .\nProcess Mode"
4252, "     .   ,    .\n    "
4253, "   .   ,   .\nPunch Card Mode"
4254, "     .   ,    .\n   "
4255, "     .   ,    .\n   "
4256, "    .   ,    .\nInternal Storages Mode"
4257, "     .   ,    .\n   "
4258, "   .   ,   ..\nDocument Mode"
4259, "    .   ,   .\n    "
4260, "    .   ,    .\n   "
4261, "    .   ,   .\nDelay Mode"
4262, "    .   ,    .\n   "
4263, "   .   ,   .\n "
4264, "    .   ,    y.\n  "
4265, "   .   ,   .\nSort  "
4266, "   .   ,   .\n "
4267, "   .   ,   ..\nTerminator Mode"
4268, "   .   ,   .\nPunched Tape Mode"
4269, "      .   ,      .\n     "
4270, "     .   ,    .\n   "
4271, "      .   ,      .\nPunched    "
4272, "   .   ,   .\\l r10  "
4273, "    .   ,    .\n   "
4274, "   .   ,   .\nDecision Mode"
4275, "   .   ,   .\nConnector Mode"
4276, "   .   ,   .\nExtract Mode"
4277, "   .   ,   .\nMerge Mode"
4298, " ..."
4299, " ..."
4300, "   .\nStyle"
5253, "    ."
5254, "     ."
5255, "       ."
5256, "      ."
5257, "      ."
5262, "%E          pin-."
5355, "%E     ."
5360, "%E  , ,   ."
5365, "%E        '%s'"
5400, "     ..\nState Variables"
5402, "       0.0,      -  X."
5403, "    ,   ."
5404, "    ."
5405, "       ."
5406, ". IC       ."
5410, "    "
5411, "     "
5412, "    "
5414, " ,      ."
5415, "  .NODESET       ."
5490, "%E     1   ."
5491, "%WM = m = .001\n  t 1e6, then use 1Meg\n\n   ?\n"
5500, "%E    , .. : '[A,]'\n%s"
5501, "%E    , ..: '[A B]'\n%s"
5502, "%E    ']', ..: '[A,B'\n%s"
5514, "    X,       ."
5515, "    X,       ."
5516, " N-    X."
5517, " N-   .Y"
5518, " N-    X."
5519, " N-   .Y"
5520, " N-     ."
5521, " N-  .  -   X  ,    ."
5522, " N-   Y.  -  ,   X  ,    .."
5523, " N-  X  ,     Y."
5524, "    X   ."
5525, "    Y   ."
5526, "    X   ."
5527, "    Y   ."
5528, "  X  N- ,      Y."
5529, "    N- ,   X    X."
5530, "  X  N-   Y ."
5531, "   N-    X."
5532, "   X min  max   N-    Y."
5533, "        N-    X."
5534, "  ( Y /  X)  N-    X."
5535, "F   . DB(expr)  PH(expr)       ."
5536, "      XMin  XMax."
5537, "      XMin  XMax."
5538, "  ."
5539, "   ."
5540, "     ."
5541, "           ."
5550, "%E %s    \"%s\"."
5551, "%E %s   PH(expr)  DB(expr)."
5552, ",   ,      ."
5600, "      Transient"
5601, "      Transient"
5602, " ,            .   0  "
5603, "    -  (. )"
5604, "    -  (. )"
5605, "  - ()"
5606, "  - ()"
5607, "      MOSFET   (1/)"
5608, "      MOSFET   (1/)"
5609, "  p-n   MOSFET   ()"
5610, "  p-n   MOSFET   ()"
5611, "        - IO"
5612, "        - IO"
5613, "    ,        "
5614, "                "
5615, "       (    1/DIGFREQ c)"
5616, "     : 0 - ; 1 - ; 2 -  "
5617, " /  (AtoD)  / (DtoA)  -   (1 - 4)"
5618, "     : 1 - ; 2 -  ; 3 - ; 4 - / (    )"
5619, "       "
5620, "        ,       "
5621, "       "
5622, " ,    p-n "
5623, "         (operating point)"
5624, "            (DC analysis)"
5625, "            (TRANSIENT)"
5626, "        "
5627, "     ,        .         PIVTOL"
5628, "     ,        "
5629, "           "
5630, "       .        "
5631, "  (,            )"
5632, " ,   ,    LTE   ."
5633, "          ."
5634, "    ,      ."
5635, "    (80  132)  "
5636, "    ."
5637, "   ."
5638, "   ."
5639, "  ."
5640, "S  ."
5641, "           (, RB, RE  RC)."
5642, " ,         ."
5643, "    (   )   (  )   .      "
5644, "   ,          1 (   SPICE3)"
5645, ",   ,     TRUE (   SPICE3)"
5646, ",   ,     FALSE (   SPICE3)"
5647, "   ,    "
5648, "      "
5649, "       .Options     "
5650, "  ()    .    >0         "
5651, " ,        .  0 ,   "
5652, " ,      .  0 ,   "
5653, "    S  H."
5654, "     ."
5655, "        ,      ."
5656, "          ."
5657, "  ,   ,  ,      ."
5658, " ,       ."
5659, "     ."
5801, "      scientific"
5802, "     engineering"
5803, "     decimal"
5804, "     decimal"
5805, "   "
5806, "   "
5900, "    .\nBold"
5901, "   .\nItalic"
5902, "  t.\nUnderline"
5903, "     t.\nStrikethrough"
5904, "      . (RTF only)\nSuperscript"
5905, "      . (RTF only)\nSubscript"
5906, "   .\nFont Color"
5907, "   .\nText Background Color"
5908, "    . ( RTF))\nText Highlight Color"
5909, "         .\nFont Gradient Color"
6201, "      Spectrum"
6300, "    3D-.\nToggle Contour"
6301, "  3D-   X.\nX View"
6302, " Y- 3D-.\nY View"
6303, " Z- 3D-.\nZ View"
6304, " 3D-      X.\nRotate  X"
6305, " 3D-      Y.\nRotate  Y"
6306, " 3D-      Z.\nRotate  Z"
6307, " 3D-      X.\n   X   "
6308, " 3D-      Y.\n   Y   "
6309, " 3D-      Z.\n   Z   "
6404, "        3D"
6405, "        Y=0"
6406, "     "
6407, "  "
6408, "     "
6409, "    "
6410, "       X  Z - "
6411, "     "
6422, "     X."
6423, "     Z."
6425, "   ."
6426, "      ."
6427, "   "
6428, "   ."
6429, "   "
6430, "   "
6431, "  ,   User Color 1  User Color 2."
6440, " "
6441, " "
6442, " "
6443, "   X"
6444, "   Y"
6445, "   Z"
6446, "  "
6447, "  "
6448, "  "
6449, "  1"
6450, "  2"
6451, " "
6600, "       \"  \"."
6601, "           Alt +."
6602, "      ."
6603, "     Alt Wire +  ."
6604, "          ."
6605, "          ."
6606, "          ."
6607, "       ."
6608, "      ."
6704, "    ."
6705, "      ."
6706, "    -      ."
6707, "            ."
6708, "        ."
6709, "       ."
6710, "         ."
6711, "       ."
6712, "     ,       ."
6713, "   ,    ."
6714, " ,       ."
6715, "       ."
6716, "       ."
6717, "        ."
6718, "        ."
6719, "  ,    ,    ."
6720, "              ."
6721, "   ,   ,      -,    ."
6722, "   X,       ."
6723, "   X,       ."
6724, "          ."
6726, "     ,      ."
6727, "    X     ."
6728, "    Y     ."
6729, "   ,    .Measure,    ."
6730, "   ,    Y     ."
6731, "     ."
6732, "     ."
6733, "   "
6801, "  ,        ,   \n     ,    ALT?"
6802, "  ,        MC9,\n    THD, THDN  SNR    VOUT, POUT   ?"
6803, "  ,          ALT + click?"
6804, "  ,          ,   ?"
6805, "  ,       ,     ,      ?"
6806, "          .\n   '...',     .\n     .    ,   .\n    ,     ."
6807, "     : Powell, Books, LM  DE.\n     ,  ,    ."
6808, "  ,          / ?"
7049, " ..."
7202, "   "
7203, "   (   )"
7204, "   ,     (     )"
7205, "  (   )"
7230, "      "
7300, " ."
7301, " ."
7303, " ,     ."
7304, "  ,     ."
7305, "  ,     ."
7306, "       CSV   .\n  "
7307, "   ,          ."
7308, " ,         ,    ."
7309, "          .\n        "
7310, "           .\n        "
7311, "          .\nCopy       "
7312, "             .\nCopy       "
7313, "         Excel.\n  "
7320, " ,        ."
7404, "%EThe   \"%s\"     ."
7405, "%EThe  %s  %s      ."
7406, "%EToo        \" \"."
7407, "%E       :\n File=%s\n Name=%s."
7408, "%E,    ,      (*.CIR)."
7410, " ,        ."
7420, "%E        ."
7421, "%EN       ."
7450, "%E   %s."
7500, "%E   Excel."
7802, "  ,     ."
7805, "  ,       ."
7808, "  ,    \"  \"."
7811, "  ,    \"    \"."
7814, "  ,     "
7817, "  ,      ."
7831, ""
7834, "       ."
7840, " ..."
7853, "           ."
7854, "  ."
7855, "      ."
7856, "     ,     ."
7857, "        ."
7858, "  (+ -)   ."
7859, "  "
7860, "   "
7862, " ,   ."
7863, "                ."
7864, "     valid."
7865, "     invalid."
7869, "%W      .  ,   ?"
7873, "   ."
7874, "    ."
7875, "    ."
7876, "         ."
7877, "        .    ."
7878, "        .    ."
9000, "   '%s' %s"
9900, "  .\n   "
10094, "  (*.csv)|*.csv|"
10095, "Excel (*.xls;*.xlsx)|*.xls;*.xlsx|"
10096, "    (*.TLIB)|*.tlib|"
10097, "  (*.DLIB)|*.dlib|"
10098, "  (*.TBK)|*.tbk|"
10099, "   (*.Wav)|*.wav|"
10102, "  (*.HADNO)|*.HADNO|"
10103, "  (*.IDNO)|*.IDNO|"
10104, "  (*.*)|*.*| t (*.TNO;*.ANO;*.DNO;*.HNO;*.INO)|*.tno;*.ano;*.dno;*.hno;*.ino|CSV ( )(*.CSV)|*.CSV|"
10105, " LTspice (*.ASC;*.APP)|*.asc;*.app|"
10106, "  (*.USR)|*.USR|CSV ( )(*.CSV)|*.CSV|   (*.Wav)|*.wav|"
10107, " SPICE (*.CKT)|*.CKT|"
10108, " SPICE Stim (*.STM)|*.STM|"
10109, "   (*.S*P;*.Z*P;*.Y*P;*.G1P;*.G2P;*.H1P;*.H2P;*.T1P;*.T2P;*.A1P;*.A2P)|*.S*P;*.Z*P;*.Y*P;*.G1P;*.G2P;*.H1P;*.H2P;*.T1P;*.T2P;*.A1P;*.A2P|"
10110, "  (*.TNO)|*.tno|"
10111, "  (*.ANO)|*.ano|"
10112, "  (*.DNO)|*.dno|"
10114, "  SPICE (*.LIB)|*.LIB|    (*.LBR)|*.LBR|"
10115, " Script (*.BAT)|*.BAT|"
10118, " (*.BOM)|*.bom|"
10119, " SPICE (*.CKT;*.STM)|*.CKT;*.STM|"
10120, "  (*.MAC)|*.MAC|"
10121, "  (*.CIR)|*.CIR|"
10122, "  SPICE (*.LIB)|*.LIB|"
10123, "   (*.LBR)|*.LBR|"
10124, "   (*.MDL)|*.MDL|"
10125, "  (*.*)|*.*|"
10126, "  (*.CMP)|*.cmp|  MC5 (COMP*.MC5)|comp*.mc5|  MC4 (CS*.MC4)|cs*.mc4|"
10127, "  (*.CMP)|*.cmp|"
10128, "  (*.CMP)|*.cmp|MC5   (COMP*.MC5)|comp*.mc5|"
10129, "   (*.SHP)|*.SHP|MC5    (shape*.mc5)|shape*.mc5|"
10130, "   (*.SHP)|*.shp|"
10131, "    (*.TNO;*.ANO;*.DNO)|*.tno;*.ano;*.dno|"
10132, " IBIS (*.IBS)|*.IBS|"
10133, "  (*.CIR)|*.CIR|   (*.MAC)|*.MAC|"
10134, "  (*.txt)|*.txt|"
10138, "  (*.CAP)|*.cap|"
10139, " (*.RES)|*.res|"
10140, "   (*.IND)|*.ind|"
10141, "   (*.USR)|*.usr|"
10142, "   (*.PKG)|*.pkg|"
10143, "    (*.RES;*.CAP;*.IND)|*.res;*.cap;*.ind|"
10144, "   (*.TOP)|*.top|"
10147, "  subckt (*.LIB;*.CKT)|*.lib;*.ckt|"
10148, "  (MCAP.DAT,MC5.DAT)|mcap.dat;mc5.dat|"
10149, " JEDEC (*.JED)|*.jed|"
10150, "%E    '%s'"
10151, "   "
10152, "   "
10153, "   "
10154, "   "
10155, "%E     2 {8,16,32,64,128,256,512,1024,2048,4096,8192... 1048576}"
10156, "%ELower Time Limit must be less than the Upper Time Limit"
10157, "%E     "
10188, "       ,    "
10189, "   ,        "
10190, "       ,   "
10191, "           "
10192, "    , ,   ,    "
10193, "      ,           R, L  C  "
10194, "      ,           R, L  C  "
10195, "        ."
10196, "    ."
10200, "  ."
10201, "    ."
10202, "  ."
10203, "  ,     ."
10401, "%E  '%.200s'"
10402, "%E  '%s'  '%.200s'"
10403, "%E   '%.200s'"
10404, "%E  '%s'  '%.200s'"
10405, "%E  ')'  '%.200s'"
10406, "%E '). '  '%.200s'"
10407, "%E  '%.200s'"
10408, "%E   '%.200s' in '%.200s'"
10409, "%E    '%.200s'"
10410, "%E   '%.200s'"
10411, "%E "
10412, "%E         \nText:\t%s"
10413, "%E   '%s'  %s (...)"
10414, "%E     %s  %s  %s (...)"
10415, "%E  %s  %s  ,      %s (...)"
10416, "%E    %s (%s)"
10417, "%  '('  '%s'  '%.200s'"
10418, "%E    % .200s'"
10419, "%E '%.200s'"
10420, "%E  '%.200s'"
10421, "%E    \"%s\"    ."
10422, "%E   '%s'   '%s' -   '%s'\n %  %.200s"
10423, "%E  "
10424, "%E   "
10425, "%E   '%s'      "
10426, "%E   '%s'    (AC)"
10427, "%E   '%s'      (DC)"
10428, "%E   '%s'     (Transient)"
10429, "%E  %s"
10430, "%E     Yn"
10431, "%E  "
10432, "%E  '%s'   . '%.200s'"
10433, "%E   '%s'   '%s'"
10434, "%E  '%s'   "
10435, "%E   '%s'  '%s'"
10436, "%E  '%s'\n %  .200s"
10437, "%E      ,   "
10438, "%     phase_margin, X-    'F',  Y-       : 'db()'  'ph()'"
10439, "%E  Last(expr,n) n    ,    "
10440, "%E   ':'"
10441, "%E   '?'"
10442, "%E    %s    "
10443, "%E      %s    "
10444, "%E ,    .      "
10445, "%E  RNDI -           ,   10ns"
10446, "%E       .array '%.200s'\n    %s"
10447, "%E      .array '%.200s'\n   %s"
10448, "%E        .Array '%s'"
10449, "%E    "
10450, "%E      "
10451, "%E      .Array"
10452, "%E  '%s'   Der"
10453, "%E   '%s'  Prod '%s'"
10454, "%E           EKV, BSIM3,  BSIM4"
10455, "%E              EKV"
10456, "%E   \"%s\"    ."
10457, "%ET     (@)    0."
10458, "%E   (@)    ."
10459, "%E   (@)      '%s'."
10460, "%E    %s(%s)    .."
10461, "%E   %s  ."
10462, "%E    %s"
10463, "%E      ."
10464, "%E,      .Measure,       ."
10465, "%E    '%s'   ."
10466, "%E      Add()."
10467, " "
10496, "%E,    ."
10497, "%E        ."
10498, "%E        "
10499, "%E,          "
10500, "%E           Sin   ."
10501, "%W Max Simulation Cycles     4."
10502, "F1   ,  F2."
10503, "%E F1    ."
10504, "%E  IM2       ."
10505, "%E  IM3       ."
10506, "%E  IM2  IM3       ."
10507, "%E     ."
10508, "%E,    ."
10509, "%E     ."
10510, "%E,     ,     ."
10511, "%E       ."
10512, "\\\n          ."
10582, "  ."
10592, "%E     ."
10595, "***   ,    ,     ."
10596, " \"\""
10597, " \" \""
10598, "  \"%s\""
10599, "  \"%s\"   \"%s\""
10600, "  \"%s\"'"
10601, "  '%s'"
10602, "    A-D."
10603, "%sA/D     %s    %s -   %s."
10604, "   '%s'"
10605, "'%s' "
10606, " '%s',   '%s',  %s '%s'"
10607, " "
10608, ":"
10609, " :"
10610, "  = %d"
10611, "  = %d"
10612, " "
10613, ":"
10614, " :"
10615, ":"
10616, ":"
10621, "%E  vn  PWL"
10622, "%E      '%s'"
10623, "%W Stim    PWL"
10624, "%E  FOR  PWL"
10625, "%E  FOR  FOREVER  PWL"
10626, "%EENDREPEAT  REPEAT  PWL"
10627, "%E ENDREPEAT  PWL"
10629, "%W   TIME_SCALE_FACTOR"
10630, "%E   VALUE_SCALE_FACTOR"
10631, "%E       "
10632, "%E  REPEAT ENDREPEAT  PWL"
10633, "%ETIME_SCALE_FACTOR    "
10634, "%EWIDTH    "
10635, "%E  '%s'"
10636, "%EI  '%s'   spice. \n    0."
10791, "%E   '%s'  "
10792, "%E    "
10793, "%E    "
10794, "%E       "
10795, "%E    "
10798, "%E,     poly    '{' '}'"
10799, "%E    '%s'"
10800, "%E       E  G."
10802, "%E    .   %s  "
10803, "%E    .   %s   "
10804, "%E    .    "
10806, "%E    .     K"
10808, "%E    .      "
10809, "%E    .   %s %s"
10810, "%E    . '%s' '%s'  "
10811, "%E    .    "
10818, "%E   .\n  '%c'   ."
10819, "%E   .\nExtra '%c'   ."
10820, "%E.Spice ,    .Subckt"
10821, "%E.EndSpice         ,   .Spice "
10822, "%E.EndSpice,   .Subckt"
10823, "%E  .EndSpice    .Spice"
10824, "%E.EndSpice    .Spice"
10825, "%E EA .Spice        .Spice."
10826, "%E    ,    REF: '%s'."
10827, "%W F  S           .\n      F   ."
10828, "%W   .\n%s"
10829, "%E K            ."
10831, "%E   "
10833, "%E   "
10834, "%E   '%s'"
10835, "%E  VALUE  %s"
10836, "%E K   >=-1.0  <= 1.0"
10837, "%E  Charge    V(%s),   Capacitance   "
10838, "%E  SPICE    "
10839, "%E      DC"
10840, "%E    "
10841, "%E       "
10842, "%E       %s"
10843, "%E  Flux     I(%s),      "
10844, "%E   %s"
10845, "%E      MAG, DB, or R_I may      "
10846, "%E      DEG or RAD,      "
10847, "%E  .\n  '%c'    ."
10848, "%E    >=1.0"
10849, "%E    ."
10850, "%E  R_I     "
10851, "%W      0,01  0,5"
10852, "%E   - '%s'"
10853, "%E ,      /  "
10854, "%E    W-"
10855, "%E     '%s' O-"
10856, "%E %s        "
10857, "%E%s '%c'   "
10858, "%E Modella    PNP4  PNP4T"
10859, "%E    .  - '<Z0=value> <[TD=val2] | [F=freq [NL=nlen]]>'"
10860, "%E  %s  "
10861, "%W %s        \n "
10862, "%W %s        \n "
10863, "%E %s        "
10864, "%E      (SAMPLE EXPR)    (PERIOD)"
10865, "%E   ,        "
10866, "%W        "
10867, "%E    . NL  TL    ,  TD  "
10869, "%W Temp     \n  T_ABS"
10870, "%E     ,      (   V(10))"
10871, "%E        . , -20%%,+80%%"
10872, "%E       . , -20%%,+80%%"
10873, "%E       . , -20%%,+80%%"
10874, "%E       . , -20%%,+80%%"
10875, "%E   ."
10887, "%E  ,    NULL "
10888, "%E      "
10889, "%E     , '%s'"
10891, "%E   .   "
10892, "%ETD     1e-16"
10893, "%E     'CLOCK FREQUENCY'"
10894, "%E     'INPUTEXPR'"
10895, "%E    .if <VarExpr>   ,    Micro-Cap.    .if <Const>"
10896, "%E "
10897, "%E    '%s'"
10898, "%E  "
10899, "%E    '%s'\n   ?"
10900, "%E    '%s'"
10901, "%E   '%s' L=%g W=%g.   "
10902, "%EMicro-Cap   CHEBYSHEV"
10903, "%E   subckt %s"
10904, "%E %s  subckt %s        "
10905, "%E "
10906, "%  "
10907, "%E   .includes"
10908, "%E "
10909, "%E  ,    subckt '%s'"
10910, "%E  %s"
10911, "%W  DISTO   / "
10912, "%E%s       "
10913, "%E   "
10914, "%E  "
10915, "%E  PWR  "
10917, "%E   %s"
10918, "%E .ENDS  .SUBCKT %s"
10919, "%E     subckt '%s'"
10920, "%E    "
10922, "%E  '%s'"
10923, "%E  0    "
10924, "%E  "
10925, "%E  ,      ,  '%s'"
10926, "%E   "
10927, "%E  ,   '%s'"
10928, "%E    '%s'"
10929, "%E   %s %s"
10930, "%E    SUBCKT %s"
10931, "%E .Ends   a .Subckt"
10932, "%E%s     ,    \n: %s"
10933, "%E%s     ,     \n: %s"
10934, "%E   .Array .  - .ARRAY  V1... vn.  .ARRAY RCAR 1K,2K,3K"
10935, "%E    . Array.  - .ARRAY  V1... vn.  .ARRAY CVAL .01u.1u"
10936, "%E   . ARRAY     "
10937, "%E  '%s'   "
10938, "%E '}'  '%s'   "
10939, "%E  '{'  '%s'   "
10940, "%E ','  '%s'   "
10941, "%E  ')'  '%s'\n         (n1, n2, n3),  n -  "
10942, "%E      .TR "
10943, "%E "
10944, "%E      "
10945, "%E      >0"
10946, "%E    >= 0"
10947, "%E  .Path.   DATA, LIB  DOC    .Path"
10950, "%E   .Watch %c"
10953, "%E   %s"
10956, "%E $ENCRYPTED_END  $ENCRYPTED_START."
10960, "%E   \"%s\"  ."
10961, "%E   -   .    ,        .\\ lr10  ,     ?"
10962, "%E     .    ,        .\\ lr10  ,     ?"
10963, "%E     .    ,        .\\ lr10  ,     ?"
10964, "%E       .inx"
10968, "%W              ."
10970, "%W  ,        "
10971, "%W  ,          "
10972, "%W  ,          "
10974, "%E      .RELTOL."
10980, "%E     ."
11021, "%E  \"%s\",    .Measure."
11022, "%E measure       ."
11023, "%E \"%s\"  ."
11024, "%E .Measure   ."
11025, "%E .Measure     \"%s\"      ."
11026, "%EA .       CROSS, RISE, FALL  AT    TRIG  TARG."
11027, "%E    '%s'   .Measure."
11028, "%E '%s'  '%s'  .  ."
11029, "%EA .    FIND/WHEN       CROSS, RISE, FALL  AT."
11030, "%EA .    FIND/WHEN       CROSS, RISE, FALL  AT."
11031, "%E   \"%s\"  AT."
11032, "%E .Measure     '%s'   FIND/WHEN."
11033, "%E .Measure    FIND   ."
11034, "%E .Measure      WHEN."
11035, "%E   ."
11036, "%E  .BEGIN_MEASURE / .END_MEASURE    .Measure."
11037, "%E.BEGIN_MEASURE   . ."
11038, "%E,   . BEGIN_MEASURE    ."
11039, "%E .END_MEASURE   .BEGIN_MEASURE."
11040, "%E    .   ,    ."
11100, "      ()     (,  ),  ( )   (  ).\nPath"
11101, "         ,   ,  ,  ,  -,   ,   ,   ,  PLA,   ,        ."
11102, "        ,       .    ,  Micro-Cap       ,         Nom.lib   ,     a .lib  .inc,      .          ,   .         ."
11103, "      ,       .        Micro-Cap    ,       ."
11104, "         .          Micro-Cap   .         ,          ."
11105, "    "
11106, "     "
11107, "   "
11108, "    "
11109, " \" \"      ,         ."
11110, "     ,  ,     ."
11111, "         ,    ."
11112, "     ."
11113, "     \" \"    ,     \"\"      .       ,    ."
11114, "     \" \"     ,      .      ,           ."
11115, "     \" \"      ,     ,   MicroCap."
11116, "      ,    ,    . ,  ,   PWL."
11117, "      ,            ."
11118, "     ."
11119, "      ."
11120, "   ,       ,         "
11121, "   ,      ,    . , USB-  -."
11122, "  .  Path    ,         .  .  Path,     ,   ,     ."
11151, "%E   '%s'."
11152, "%E \"%s\"."
11153, "%E     .parameters  ."
11154, "%E  \"%s\"."
11155, "%E.     ."
11156, "%W       -,      ."
11157, "%EPin '%s'  ."
11158, "%E   '%s'."
11159, "%W %s          .\n    ?"
11170, "%E,  '('   '%s'."
11171, "%E  ."
11172, "%E   %s."
11173, "%E  ."
11174, "%E  '%s'."
11175, "%E    %s"
11176, "%E   LOT   .define."
11177, "%E LOT='%%'   define ,       ."
11178, "%E    %s."
11179, "%E  LOG       ."
11180, "%E '}'  %s."
11181, "%E  ."
11182, "%E    %s %s"
11183, "%E    %s %s"
11200, "File"
11201, "Edit"
11202, "Component"
11203, "Windows"
11204, "Options"
11205, "Analysis"
11206, "Box"
11207, "Mode"
11208, "View"
11209, "Scope"
11210, "Cursor"
11211, ""
11213, ""
11220, "   ."
11230, "%E,     ."
11231, "%E      ."
11232, "%E      ."
11350, "%E   .ELSE"
11351, "%E   .ELIF"
11352, "%E   .ENDIF"
11353, "%E .ENDIF     .IF"
11354, "%E    .IF"
11400, "  , SPICE-,     \n"
11401, "  (.cir)"
11402, "  (.mac)"
11403, "   (.txt)"
11404, " SPICE (.ckt)"
11405, "   (.lib)"
11406, "   (.lbr)"
11407, "  (.mdl)"
11408, "  (.bat)"
11409, "    (*.tlib)"
11410, "  (*.dlib)"
11542, "    "
11544, "   "
11546, "   "
11548, "   "
11550, "   "
11552, "   (%%)"
11554, "   "
11556, "     "
11851, "%E   . ,  P5>=P4>=P3>=P2>=P1"
11852, "%E  '%s'."
11854, "%E     T_REL_GLOBAL, T_REL_LOCAL  T_ABS     "
11855, "%E   '%s'"
11856, "%E  GaAsFET, VMAX   ,  VBI"
11857, "%E AKO    %s"
11858, "%E   AKO   %s"
11859, "%E     "
11861, "%E  '%s'  '%s'"
11863, "%E<%s #>    0  9"
11864, "%E VON  VOFF    S   "
11865, "%E ION  IOFF    W   "
11866, "%W ')'."
11867, "%E   %s  ."
11891, "%W          "
11895, "%E Method     GEAR  TRAP"
11896, "%E   '%s'"
11897, "%E   %s"
11898, "%W .,    / ."
11900, "%E   '%s'"
11901, "%E  '%s'  '%s'"
11902, "%E  '%s',   '%s'"
11903, "%E    '%s'"
11904, "%W   '%s'"
11905, "%E  '%s'  STIM-"
12001, "%E        "
12003, "%E  "
12005, "%E     T   F  Transient"
12007, "%E '('"
12008, "%E     '%s'"
12009, "%E    '%s' vs. '%s'      '%s'"
12010, "%E  %s   '%s'\n  '%s'"
12011, "%E   %s   '%s'\n  '%s'"
12012, "%E  %s    '%s'\n  '%s'\n     '%s'"
12013, "%E      Waveform Buffer"
12101, "      "
12104, "   ,     "
12105, "   "
12106, "   "
12107, "       "
12110, " ,    ,   \n  "
12111, "   "
12113, "   "
12114, "   "
12115, "  "
12116, "    "
12118, "         \n "
12119, "      \n "
12120, "      \n "
12121, "   \n  "
12122, "          Micro-Cap\n"
12123, "   \\ lr10Add"
12124, "    .\nFind"
12125, "        ."
12126, "   .\nSave"
12127, "   \nRevert"
12130, "     X.\nFlip X"
12131, "     Y.\nFlip Y"
12132, "     .\nMirror"
12133, "   .\nRotate"
12151, "  ,     .\n PastefromClipboard List"
12174, "    .    -    ,    ,  ,  \\   lr10Edit"
12189, "     \n      "
12190, "            .        (CTRL+).\n    "
12191, "     X   .\n   "
12192, "            .        (CTRL+).\n    "
12193, "            .        (CTRL+click).\nAlign Top"
12194, "   Y   .\nAlign Middle"
12195, "            .        (CTRL+).\nAlign "
12196, "   ,            .   ,      .\n   "
12197, "    "
12199, "  (   ) .\n  "
12200, "   \n  "
12201, "   \n   "
12203, "       "
12204, " ,    .\nPaste Image"
12205, "     \nCopy    "
12207, "    \n ..."
12211, "      .\\  lr10Add"
12214, " ,   ."
12226, "  "
12228, "X  "
12229, "Y  "
12240, ".."
12252, " "
12253, " "
12270, "&"
12271, "&"
12272, "&"
12273, "   %song."
12274, "  %s."
12275, "     ."
12289, "  "
12291, " "
12292, " .        "
12293, " .       "
12294, "   "
12296, "  "
12298, "  "
12299, "   "
12300, "  ,       \n  "
12301, "    \n "
12302, "   \n "
12303, "   \n"
12304, "          \n"
12305, "   "
12307, "   %s ,     "
12308, "    (PART),     "
12309, "  (NAME)%s,     "
12310, "   (MODEL NAME),     "
12313, "     \n "
12314, "          \n"
12315, "          ,     \n"
12327, " ,    "
12329, "               "
12331, "         "
12332, "       "
12333, "        \n"
12334, "        \n"
12335, "    (Cost)    (Power)    \n   "
12338, "   .\nSave"
12339, "   \nRevert"
12340, "     \n"
12341, "     \n"
12342, "     \n  "
12344, "   ,    "
12346, "   ,    "
12347, "   SPICE-,    ,    \n "
12348, "        Micro-Cap\n"
12349, "  subckt,  ,     \n"
12350, "     .\n   "
12351, "     ,     \n "
12352, "  \n"
12353, "   \n"
12354, "     \n"
12355, "      \n "
12356, ": ,      subckt, ,  ,  ,   "
12357, " :   ,   "
12358, " :   ,   "
12360, "   .     URL,   "
12363, "    .         ,    IBIS"
12370, "      %s . %s  -   ,      "
12371, "      %s "
12373, "          "
12374, "          \n "
12380, "   ,    Link"
12411, "   \n "
12450, "     .  ,    "
12454, "     .  ,    "
12460, "   "
12461, "        "
12462, "  -   "
12463, "    "
12465, "      "
12466, "      "
12467, "        "
12468, "        (   ) "
12469, "   -    "
12470, "     "
12501, "%E       "
12502, "%W      '%s',\n       \n   ?"
12503, "%W    .SUBCKT   '%s',\n       \n   ?"
12504, "%E     '%s'\n         "
12505, "%E   "
12506, "      \n"
12507, "%E    SUBCKT   '%s',\n      "
12508, "      ,            .\nBackup And Restore"
12513, "   Micro-Cap"
12516, "%E        ,     "
12517, "%E     .CIR  .MAC"
12530, "%E       ,     ."
12531, "%E      \"%s\"  ."
12611, "       %s ,     .       ,      "
12613, " "
12614, "  ,   subckt"
12615, "  ,   "
12616, "    "
12617, "%E   "
12626, "%E '%s'     '%s'"
12640, "$NAME\t  "
12641, "$NAMEEXT\t    "
12642, "$MC\t  Micro-Cap"
12643, "$DATE\t  "
12644, "$TIME\t  "
12645, "$USER\t  "
12646, "$COMPANY\t  "
12647, "$PAGE\t  "
12648, "$PAGENAME  "
12649, "$MAXPAGE\t   "
12650, "$SECTION\t  "
12651, "$SECTIONNAME\t  "
12652, "$MAXSECTION\t   "
12653, "$SHEET\t  "
12654, "$MAXSHEET\t   "
12655, "$ANALYSIS\t    ."
12656, "$ \t      ."
12657, "$ \t      ."
12658, "$PATH\t     ."
12801, "      "
12809, "  "
12810, "      ."
12812, " ,        .."
12813, "       .."
12814, "        ."
12815, "     ."
12913, " ()   ,       \n  , , "
12985, "     ."
13017, " "
13018, "%E    "
13090, "%W   .  ,   ?"
13181, "%E   Stim    "
13182, "%E "
13183, "%E "
13184, "%EUNTIL   GT,GE,LT  LE"
13185, "%E   GOTO, INCR, DECR       "
13186, "%E  Goto"
13190, "%E  <format array>"
13191, "%E  "
13192, "%E  '%s'"
13193, "%E  "
13194, "%E      "
13195, "%E   REPEAT"
13196, "%E  REPEAT   <n> TIMES  FOREVER"
13197, "%E  REPEAT"
13198, "%EENDREPEAT   REPEAT"
13199, "%EREPEAT   ENDREPEAT"
13200, "%E    <format array>"
13201, "%E 'BY'"
13202, "%E  <time>"
13203, "%E   <label name>"
13204, "%E  'TIMES'"
13206, "%E  REPEAT   "
13207, "%     > 0"
13221, "%E   :"
13222, "%E    '%s'"
13223, "%E    '%s'"
13225, "%E  '%s',   '%s'   '%s'"
13226, "%E  '%s'"
13227, "%E  '%s'    Constraint"
13228, "%E   Enable HI|LO   :"
13229, "%E    BOOLEAN:, PINDLY:, TRISTATE:, SETUP_HOLD:, WIDTH:, FREQ:,  GENERAL:"
13230, "%   BOOLEAN:, SETUP_HOLD:, WIDTH:, FREQ:,  GENERAL:"
13231, "%E '%s'    "
13232, "%E  '%s'  DATA()"
13233, "%E  '%s'  ENABLE"
13234, "%E     'B','O',  'X'"
13235, "%E  '%c'    "
13236, "%E     "
13237, "%E       "
13238, "%E   "
13239, "%E    QF"
13240, "%E   "
13241, "%E %d   \n     K, L,    F"
13242, "%E "
13243, "%E   <temporary value>    LOGICEXP"
13244, "%E   <enable node>   "
13245, "%E   <output node>    PINDLY"
13246, "%E  <node>   CONSTRAINT"
13247, "%E   <input node>   DATA   CONSTRAINT"
13248, "%E   <Boolean variable>"
13249, "%E  %d"
13250, "%E   PLA    "
13252, "%E %s  "
13253, "%E   TIMESCALE      "
13254, "%E       %s"
13255, "%E %s      STIM %s"
13256, "%E    ,    %d "
13257, "%E 'TIMESCALE'   '='"
13258, "   ,    ,      - "
13260, "%W%d    %s\n  Numeric Output"
13271, "%E  ,   '%s'"
13274, "%E  "
13275, "%E   ,   '%s'"
13276, "%E  "
13277, "%E     '%s'"
13278, "%E   '%s'   '%s'"
13279, "%E  1000      Stepping"
13281, "%E  "
13282, "%E  "
13283, "%E  "
13284, "%E  '%s'   "
13285, "%E   define   '%s'"
13286, "%E   ()        "
13287, "%E  "
13290, "&"
13291, ""
13298, "%E    \n       "
13299, "%E           "
13306, "%E          -."
13370, "Circuit"
13371, "Analog       Total   Rejected       Total       Run     Setup      Load     Solve   Device     DoIO    Trunc    Break"
13372, " Nodes  Iterations  Solutions   Solutions      Time      Time      Time      Time     Time     Time     Time     Time\n"
13373, "    %s\n"
13374, "   %s\n"
13375, "  ()  %s\n"
13376, "   %s\n"
13377, "   %s\n"
13378, "    Total Update Device time %s\n"
13379, "Total DoIO time %s\n"
13380, "   (Truncate) %s\n"
13381, "%E   "
13383, "   ?"
13384, "%E%s  . ,   "
13385, "%E   ,     "
13386, " '%s'     ?"
13387, "    "
13388, "     "
13389, "     "
13390, "      "
13391, "     "
13392, "%W   ,     .\n     ,   ."
13394, "%W   ,   ,    .\n      ?"
13395, "   -    breakpoints %s"
13398, "%W  TC1     ."
13399, "%W  TC2     ."
13503, "%WMicro-Cap    -  MC4.   X  Y,   "
13505, "%E      MC4,     .    "
13506, "%E  ."
13507, "%W     "
13508, "%W %s    .        ?"
13509, " .  "
13510, "%E   \n%s"
13511, "     ?"
13512, "%W     MC%d. , ,    "
13513, "%W     \n %s\n\n%s"
13514, "%E    ,   "
13515, "%E    ,      "
13516, "%W %s    Micro-Cap\n   ?"
13517, "%W %s    Micro-Cap\n      ,   Micro-Cap?"
13518, "%W%s  .\n    ?"
13519, "%E     \"%s\".'."
13520, "%E        ."
13530, "%E  "
13535, "%EOutput Start Time must be less than the Maximum Run Time."
13536, "%E      ."
13537, "%E        ."
13541, "%E "
13542, "%E        "
13544, "%W   %g      !\n,   .   ?"
13546, "%W     ,  ,    10 000 000   .   ?"
13547, "%E    %s"
13548, "%W %d  ata   %d"
13549, "%W     .    ?"
13550, "%W %s    X    ."
13551, "%W     ,   .        0."
13552, "%W    , STIM      1 000 000  .   ?"
13553, "%E            "
13554, "%W    , PWL      1 000 000 .   ?"
13555, "%W '%s'  .       . ?"
13556, "   '%s'?"
13557, "%E     "
13558, "%W '%s'  \n       . ?"
13561, "%E  "
13570, "%E  "
13572, "%E     TEMP temperature,        Temperature."
13575, "%E       "
13577, "%E          "
13578, "%E    <1e30.     ,  "
13579, "%E        ,   <=0"
13580, "%E           0."
13581, "%E   , , 3D  -,      ,   ."
13582, "%E ')'"
13583, "%E "
13584, "%E  "
13585, "%E           "
13586, "%E       0.0  1.0     "
13587, "%E        "
13588, "%E   .      -273,15C."
13589, "      .       .."
13590, "      "
13592, "Left Cursor"
13593, "Right Cursor"
13594, "F"
13595, "G"
13596, "Gamma"
13597, "Z"
13598, "Complex"
13599, "Mag Ang"
13612, "Left"
13613, "Right"
13614, "Delta"
13615, "Slope"
13616, "%E -  "
13619, "%W ,     .\n%s"
13620, "%E  IBIS,            :\n\n: in\n  : In,Vcc,Vee\n: In,En,Out\n  : In,En,Vcc,Vee,Out"
13621, "%E   "
13622, "%E  ,     "
13623, "%W  .     ?"
13624, "%ESTIM     1    ,  32"
13625, "%W     "
13627, "%E  "
13628, "%E   "
13629, "%W '%s'    \n         \nMicro-Cap     "
13630, "%E   PB     SB"
13631, "%E     %d\n     2  %d"
13632, "%E ,   ,  10"
13633, "%E        (Fs)       (Fc)"
13634, "%E        (Fs)       (Fc)"
13635, "%E  , PB/2       Fc"
13636, "%E   KHN-    > =-5 "
13637, "%E -       >= 0 "
13638, "%E      "
13639, "%E  , PB/2       Fc"
13640, "%E KHN, Acker-Mossberg, and Tow-Thomas    20  "
13641, "%E      "
13642, "%E   -    <=70db"
13643, "%E       %g.      0.4"
13644, "%E   (PB)     (SB)       (FC)"
13645, "%E  ,    (PB)        (SB)"
13646, "%E      Q/Gain     .      "
13647, "%E     "
13648, "%E  -  MFB        \n   %g,   .        "
13650, "%E      "
13651, "%E %s - . ,       "
13652, "%E ,   ,    .    "
13653, "%E ,   ,          2.     "
13654, "%E ,          .     "
13655, "%W  %s  .     ?"
13656, "%E     ,     "
13657, "%E    "
13659, "%E   ."
13660, "   , ,   \n     .IC      \n   .\n ?"
13661, "%ENSUB   >= NI   MOSFET"
13662, "%ETOX   >0.0   MOSFET"
13680, "%Wk1 should be specified with k2 in model '%s'.\n"
13681, "%Wk2     k1   '%s'\n"
13682, "%Wnsub ,   k1  k2    '%s'\n"
13683, "%Wxt ,   k1  k2    '%s'\n"
13684, "%Wvbx ,   k1  k2    '%s'\n"
13685, "%Wvbm ,   k1  k2    '%s'\n"
13686, "%Wgamma1 ,   k1  k2    '%s'\n"
13687, "%Wgamma2 ,   k1  k2    '%s'\n"
13688, "%E  , SB/2       Fc"
13689, "%E  , SB/2       Fc"
13690, " %s    PHI ( PB, VJ, VJE,  VJC)     =%f\n"
13691, "   /  \n"
13781, "%E  '%s'   '%s'"
13782, "  Performance"
13801, "%E    "
13802, "%E               Log/linear"
13803, "%E "
13804, "%E                "
13807, "%E  X      "
13810, "%E   FFT/IFT  X "
13811, "%EX    F  T,   Y - FFT/IFT"
13812, "%EX    T,   Y - FS  RES"
13813, "%E       X"
13815, "%E     AC-"
13816, "%E       ."
13817, "%W  Y  FFT, FFT, FS, HARM, HARM, THD, THD N  IND,   X   F,      F."
13818, "%W  Y  OFT   ,   X  ."
13850, "  %s"
13860, "%   ( 32)."
13899, "  %s     ,     :\n%s"
13901, "  %6.2f"
13903, "Low"
13904, "Mean"
13905, "High"
13906, "Sigma"
13912, "Grid Spacing"
13913, "Range Low"
13914, "Range High"
13924, "Number of Runs %d"
13926, "Bar Count"
13930, "Font Color"
13931, "Grid Color"
13932, "Bar Front Color"
13933, "Bar Top/Side Color"
13934, "Graph Background Color"
13935, "Window Background Color"
13936, "Select Color"
13937, "Select Box Color"
13938, "Anchor Color"
13951, "Individual run statistics"
13952, "               "
13953, "%W       \" -  , \"   ."
13956, " = % s   = % s  = % s   = %s\n"
13960, "Transient"
13961, "AC"
13962, "DC"
13963, "Harmonic Distortion"
13964, "Intermodulation Distortion"
13965, "Stability"
13966, "Dynamic AC"
13967, "Dynamic DC"
13968, "Transfer Function"
13969, "DC OP Worst Case"
13970, "&Transient"
13971, "&AC"
13972, "&DC"
13973, "&Harmonic Distortion"
13974, "&Intermodulation Distortion"
13975, "Stability"
13980, "Transient Analysis"
13981, "AC Analysis"
13982, "DC Analysis"
13983, "Harmonic Distortion Analysis"
13984, "Intermodulation Distortion Analysis"
13985, "Stability Analysis"
13986, "Dynamic AC"
13987, "Dynamic DC"
13991, "    (Transient)"
13992, "   (AC)"
13993, "     (DC)"
13994, "  Harmonic Distortion-"
13995, "   "
13996, "  "
14000, "%E          ."
14002, "      ."
14003, "   ,     ."
14004, "       ."
14005, "   ."
14006, "    .         .\n    "
14007, "   .\nAdd  "
14008, "     ."
14009, "    ."
14010, "         .\n  "
14011, "      .\n "
14012, "      .\n  "
14013, "      .\n   "
14014, "           MicroCap.\n Translate"
14015, "    \nAdd Group"
14016, "     .\nFind"
14017, "         ."
14018, "    .\nSave"
14019, " ,    ."
14051, "%E   %s"
14061, "%E   "
14062, "  %s"
14063, "  Micro-Cap? "
14064, "%W     (level),     . ?"
14070, "%E%s=%g      "
14071, "%E%s=%g       "
14072, "%E%s=%g    >=0  <=1"
14073, "%E%s=%g    >=0  <=3"
14074, "%E%s=%g    >=1  <=3"
14075, "%E%s=%s    \"0\",\"1\",\"R\",\"F\",\"X\",\"Z\",\"\"."
14076, "%E LEVEL   1 ......"
14077, "%E LEVEL   1,2  3"
14078, "%E LEVEL   ........\n     "
14079, "%E  LEVEL   .....\n      "
14080, "%E  LEVEL   1, 2, 21, 500  501"
14081, "%E  LEVEL   21  501.\n     "
14082, "%E  LEVEL   1, 2  500.\n      "
14083, "%E  LEVEL   1,2"
14084, "%E  LEVEL   1, 2, 4  200"
14085, "%E%s=%g    >=1  <=4."
14086, "%WNB    .  NB     "
14091, "      1 - 600"
14092, "%E      "
14093, "%E  "
14100, "%E   =%d"
14101, "%E   "
14102, "  '%s'      %s  \n,   Spectrum Software    "
14103, "Hasp-    "
14104, "    \"%s\" ."
14105, "%E ,  ,  ."
14106, "%E   \n ,     HASP 3,       .\n   Spectrum."
14107, "    ..."
14181, "%ERLCG, RL, GL,  GC      "
14182, "%E      -       .   Spectrum Software"
14183, "%E  length    "
14184, "%E      -    .   Spectrum Software."
14185, "%E    ,     R,L,G,C       "
14190, "%E          =%g"
14191, "%E         "
14192, "%E   %g"
14193, "%E        ."
14220, "  "
14225, "   "
14226, "    "
14282, "   "
14301, "    \n  "
14302, "              ,      "
14303, "     "
14403, "               "
14500, "%ENlx = %g -   -Leff"
14501, "%ETox = %g -   "
14502, "%ENch = %g -   "
14503, "%ENsub = %g -   "
14504, "%ENgate = %g Ngate -   "
14505, "%ENgate = %g Ngate  "
14506, "%EXj = %g -   "
14507, "%EDvt1 = %g - "
14508, "%EDvt1w = %g - "
14509, "%E(W0 + Weff) = 0    "
14510, "%EDsub = %g - "
14511, "%E(B1 + Weff) = 0    "
14512, "%Eu0    = %g -   "
14513, "%E = %g -  "
14514, "%EVsat    = %g -   "
14515, "%EPclm = %g -   "
14516, "%EDrout = %g - "
14519, "%EClc = %g - "
14520, "%WLeff = %g   "
14521, "%WLeff  CV = %g   "
14522, "%WWeff = %g   "
14523, "%WWeff  CV = %g   "
14524, "%WNlx = %g - "
14525, "%WTox = %g -   10A"
14526, "%WNch = %g   "
14527, "%WNch = %g   "
14528, "%WNsub = %g   "
14529, "%WNsub = %g   "
14530, "%WNgate = %g -   1. E18cm ^-3"
14531, "%WDvt0 = %g - "
14532, "%W (W0 + Weff)   "
14533, "%WNfactor = %g  "
14534, "%WCdsc = %g  "
14535, "%WCdscd = %g  "
14537, "%WEta0 = %g  "
14538, "%WA2 = %g  .  0.01"
14539, "%WA2 = %g    1. A2   1,  A1   0"
14540, "%WRdsw = %g  .   "
14541, "%WRds    = %g  .   "
14542, "%WVsat    = %g   "
14543, "%WPdibl1 = %g  "
14544, "%WPdibl2 = %g  "
14545, "%WCgdo = %g  .   "
14546, "%WCgso = %g  .   "
14547, "%WCgso = %g is negative. Set to zero."
14548, "%WCgso = %g  .   "
14549, "%E   %g.    "
14550, "%E    C-V %g.    "
14551, "%E    C-V %g.    "
14552, "%EToxm = %g -    "
14553, "%WNoff = %g  "
14554, "%WNoff = %g  "
14555, "%WVoffcv = %g  .      -.5  + .5"
14556, "%WVoffcv = %g  .      -.5  +.5"
14557, "%WMoin = %g  .     5 - 25"
14558, "%WMoin = %g  .     5 - 25"
14559, "%WAcde = %g  .      .4  1.6"
14560, "%WAcde = %g  .      .4  1.6"
14561, "%ELintnoi = %g   - Leff    "
14562, "%ENGATE = %g.    "
14570, "     Performance-\n Performance"
14573, "    Performance"
14583, "     .\\ lr10 "
14600, "     \n 3D"
14603, " 3D-  "
14613, "   3D-.\n3D windows"
14620, "    X"
14621, "    Y"
14622, "    Z"
14650, "   - FFT\n FFT"
14652, "  - FFT  "
14662, "    .\nFourier windows"
14669, "    .\nSlider"
14670, "     - "
14672, "     "
14682, "    .\nSlider windows"
14701, "%E     HASP HL."
14702, "%E   \"  \"."
14703, "%E     ."
14704, "%E   ."
14705, "%E   ."
14706, "%E        ."
14707, "%E HASP HL   ."
14708, "%E        ."
14709, "%E    ."
14710, "%E     API."
14711, "%E       ."
14712, "%E   (rtc) ."
14713, "%E  -   ."
14714, "%E   ."
14715, "%E    ."
14716, "%E       ."
14717, "%E ,  ,   ."
14718, "%E HASP HL,    ,  ."
14719, "%E XML-  .       ."
14720, "%E      HASP HL."
14721, "%E   ."
14722, "%E    ."
14723, "%E      ."
14724, "%E        ."
14725, "%E    ."
14726, "%E,  ,   update ack_data,  ."
14727, "%E     ."
14728, "%E    ."
14729, "%E ,    V2C."
14730, "%E    ."
14731, "%E    ."
14732, "%E   "
14750, "%E  ."
14751, "%E  ."
14752, "%E       ."
14753, "%E       ."
14754, "%E,       ."
14755, "%E    ."
14860, "%E %s    ,        .\n   ,     www.spectrum-soft.com ."
14861, "%W  Micro-Cap  ,   PDF-.\n     MicroCap"
14862, "   Micro-Cap.\n,          ,    ,\n  DOS,  ,     .\n\n    Micro-Cap?"
14923, "    3D    Z=0"
14930, "     .\n   "
14932, "     ."
14942, "     .\n   "
14960, "     .\nAdd  "
14962, "     ."
14972, "     .\n   "
15000, "%W    -      %s."
15001, "%E - "
15002, "%E ."
15003, "%E  '%s'"
15007, "%E   %s"
15008, "%E   %s"
15009, "%E    '%s'"
15010, "%E   '%s'"
15015, "%EOPAMP '%s',     C2"
15016, "%E OPAMP '%s', Ibias  > Ioff/2"
15017, "%E OPAMP '%s', SRP  > 4*PI*gbw*VT"
15018, "%E OPAMP '%s', ZoDC     ZoAC"
15019, "%E OPAMP '%s',  , NPN-, SRP>=SRN"
15020, "%E OPAMP '%s',   PNP-, SRN>=SRP"
15022, "%E,   '%s'"
15023, "%E    '%s'"
15024, "%E  . ,  . (=1000)"
15025, "%E  . ,  ."
15026, "%W '%s'   "
15027, "%E OPAMP '%s', SRN   >4*PI*gbw*VT"
15028, "%E OPAMP '%s', Vcc   >=VPS"
15029, "%E OPAMP '%s', Vee   <= VNS."
15032, "%E     -  DtoA"
15033, "%E  X  0    -  AtoD"
15034, "%E  X  0    -  DtoA"
15035, "%E      "
15038, "%E   "
15040, "%E "
15047, "%E   %s"
15048, "%E ()"
15049, "%W  ,  '%s'"
15050, "%E OPAMP '%s', PD     %s"
15051, "%E "
15053, "%E"
15080, "%E(),  \n%s"
15082, " ."
15084, "%EPSS     ,   ."
15099, "%E     '"
15100, "%E\"    \""
15101, "%E\"\"   "
15102, "%E     '"
15103, "%E\"\"   "
15104, "%E\" \"   "
15105, "%E\"\"    "
15106, "%E\"\"   "
15107, " sqrt ()"
15108, " "
15109, "    "
15111, "%E    "
15112, "%E\" \"   "
15113, "%E\" \"   "
15120, "%E     ."
15140, "%E   > 0,      1024"
15159, "%E   ."
15200, "%1  %2"
15201, "  %1"
15202, "  %1"
15203, "   %1"
15204, "  %1"
15205, "  %1"
15206, " "
15207, "    , :%1"
15208, "     , :%1"
15209, "      "
15210, "    HTTP   "
15211, "   , :%1"
15212, "%1%  %2 "
15213, "   %1"
15214, "%1  %2"
15215, "%1 "
15216, "%1 "
15217, "%1  %2 "
15218, "%1 "
15219, "%1 "
15221, "%1 "
15223, "%1 (%2 ) "
15224, "%1 /"
15225, "%1 /"
15226, "    ,      , :%1"
15227, " "
15240, "%1 GB"
15251, " :\n\t      .\n\t      .\n\t     .\n"
15252, "\t   %s\n"
15253, "\\lrR9  .\n\t    .\n      :\n\\lr 9"
15254, "  :\n\t%s\n\t%s"
15255, "  :\n\t%s\n\t%s\n\t%s\n\t%s\n\t%s\n"
15256, "  :\n\t    \n\t,     ->  \n"
15257, "  :\n\t    \n\t  name.lib\n\t  Standard.cmb  \n\t  Standard.shp  \n"
15312, "      .\n   "
15313, "     .\n   "
15314, "  \n"
15316, "  ,      "
15317, "    .\n    "
15318, "    "
15319, "       \n"
15320, "     \n"
15321, "      \n "
15322, "  . , NPN-  PNP"
15323, "        (-A/)    (-)\n     "
15324, ""
15325, "   .\nEdit Graph"
15329, "      \n "
15330, " "
15331, " NPN-"
15332, " PNP.\n  PNP"
15333, " NMOS-"
15334, " PMOS-"
15335, " NJFET-"
15336, " PJFET-"
15337, " OPAMP ( )"
15338, "  "
15339, "   "
15340, "       \n "
15341, "      .  , ,   \n "
15342, "      .\nClipboard Data Import"
15343, "  \n "
15344, "  \n "
15345, "      \n "
15346, "      \n "
15347, "  \n "
15348, "  \n "
15349, "    \n "
15350, "    \n "
15351, "     "
15352, "     "
15364, "       \n"
15365, "         \n"
15366, "        "
15367, "        "
15369, "     .\n   "
15370, "     .\n   "
15371, "   X  Z    .\\l r10  "
15376, "    .\n     "
15377, "       .\n     "
15383, "   .\n   "
15384, "       .\nAdd Graph"
15385, "       .\nOrder Graph"
15386, "   .\nDelete Graph"
15387, "       .\nTemplate Library"
15388, "       .\nSave    "
15389, "      .\n   "
15390, "  ,  ."
15400, "     ,      \n"
15415, "%W %s  .\n    ?"
15416, "%s    %s \n        "
15425, "      SPICE-   .LIB\n    "
15498, " "
15502, "       ,       -."
15503, "    ,       -."
15504, "     ,       -."
15505, "     ,       -."
15506, "      ,       -."
15507, "      ,       -."
15508, "     ,       -."
15509, "     ,       -."
15510, "     ,       -."
15514, "      ,       ."
15678, "    \n"
15679, "    "
15684, "     "
15685, "   ()  .        (Scope / View / Data Points is enabled)"
15688, "       -  (   )       (Popsicle)"
15690, "       ."
15693, "     ."
15695, " "
15696, " "
15697, ""
15698, " "
15701, "      "
15702, "    "
15703, "    "
15705, "  ,   "
15706, "  "
15707, "  "
15708, "            "
15709, "  ()     "
15710, "      ."
15711, "      ."
15712, "    ."
15713, "    ."
15714, "      ."
15715, "    ."
15716, " ,      .."
15718, "  ,   ,   ."
15719, " ,       WAV."
15726, "   "
15727, "  "
15811, "  % 1  % 2"
15812, "  ..."
15813, "  ..."
15814, "  ..."
15815, "   ..."
15900, "  "
15901, "       "
15902, "       "
15903, "        "
16001, "Displays all possible curves for the object clicked on.\nAll"
16002, "Deletes all curves from the Window.\nDelete all Plots"
16003, "Places analog and digital curves in separate plot groups.\nSeparate Analog and Digital"
16004, "Displays one curve only.\nOne Curve"
16005, "Displays multiple curves.\nMany Curves"
16006, "Saves all possible curves for plotting.\nSave All"
16007, "Saves only states, voltages, and currents for plotting.\nSave V and I Only"
16008, "Displays voltage curves.\nVoltage"
16009, "Displays current curves.\nCurrent"
16010, "Displays energy curves.\nEnergy"
16011, "Displays power curves.\nPower"
16012, "Displays resistance curves.\nResistance"
16013, "Displays charge curves.\nCharge"
16014, "Displays capacitance curves.\nCapacitance"
16015, "Displays flux curves.\nFlux"
16016, "  "
16017, "    B"
16018, "     H"
16019, "  T     Y"
16021, "      X"
16022, "      X"
16023, "      X"
16024, "      X"
16025, "      X"
16026, "      X"
16027, "      X"
16028, "       X"
16029, "      X"
16030, "    B     X"
16031, "    H     X"
16032, "  T     X\nTime"
16033, "  \nConductance"
16034, "  \nImpedance"
16035, "  ,    \nInput noise"
16036, "  ,    \nOutput noise"
16037, "      Y.\nFrequency"
16038, "  .\nMagnitude"
16039, "    .\nMagnitude in dB"
16040, "  .\nPhase"
16041, "   .\nGroup Delay"
16042, "   .\nReal"
16043, "   .\nImaginary"
16046, "  .\nConductance"
16047, "  s.\nImpedance"
16048, "       X.\nInput Noise"
16049, "       X.\nOutput Noise"
16050, "      X.\nFrequency"
16051, "    X\nMagnitude"
16052, "      X.\nMagnitude in dB"
16053, "    X\nPhase"
16054, "     X.\nGroup Delay"
16055, "     X.\nReal"
16056, "     X.\nImaginary"
16063, "  Y   .\nLinear scale Y"
16064, "  Y   "
16065, "  X   "
16066, "  X   "
16067, ".       \n"
16068, " \n"
16069, " .... \n"
16070, "      "
16071, "     \n "
16078, "   1\nGroup 1"
16079, "   2.\nGroup 2"
16080, "   3.\nGroup 3"
16081, "   4\nGroup 4"
16082, "   5\nGroup 5"
16083, "   6.\nGroup 6"
16084, "   7.\nGroup 7"
16085, "   8.\nGroup 8"
16086, "   9.\nGroup 9"
16087, "         .\n Group individual"
16088, "    .\nDelete Curves"
16089, "   Y   . X-   ,      F10\nAdd Curve"
16090, "       1  19."
16093, ""
16094, " "
16095, " "
16096, ""
16097, ""
16098, ""
16099, ""
16100, "   .\nActive Filters"
16470, "    \nPassive Filters"
16484, "%E  API"
16500, "  X, Y     .\nTracker Cursor"
16501, "   X/Y     .\nTracker Intercept"
16502, "    .\nTracker Mouse"
16503, "       .\nTracker Cursor: Branch Info"
16601, "    ( )  ,    "
16602, "    ( )  ,     "
16603, " ,      ,  ,  subckt     "
16604, "      ,  subckt     "
16605, " ,       ,   ."
16606, "    (  ) ,     "
16609, "%E         ."
16610, " ()    ,    ."
16611, " ()     ,    ."
16612, " ()    ,    ."
16613, " ()     (STM),    ."
16614, " ()     (USR),    ."
16615, " ()   JEDI digital (JED),    ."
16616, " ()   Touchstone (S2P),    ."
16617, " ()   ,    ."
16618, " () mcap.inc"
16711, ""
16712, "P"
16713, " X"
16714, "Y "
16715, "X "
16716, " Y"
16717, ">"
16801, "  :"
16811, " "
16812, "  "
16900, " "
16902, " \n  "
16903, "         .\nDC OP  "
16904, "       ."
16905, " RSS (  )          ."
16906, "              ."
16907, "  EVA    .   ,  ,   EVA."
16908, "      -      ."
16909, "       ."
16911, " DV   ,         ."
16912, "       .       ."
16913, "     ."
16914, "  ,     .      ."
16916, "              ."
16918, "   Excel      ."
16920, "    .    ,   ."
16921, "  RSS   "
16922, "  EVA   "
16923, "       -"
16924, "       "
16925, "       "
16926, "         "
16927, "               "
16928, "               "
16930, ""
16931, ""
16932, ""
16933, ""
16934, ""
16935, " (%/%)"
16936, "  RSS"
16937, "  RSS"
16938, ""
16940, "   "
16941, "   "
16942, "     "
16943, "     "
16944, "    - "
16945, "    - "
16946, ""
16948, "RSS MinTol%"
16949, "RSS Max Tol%"
16950, "EVA Min Tol%"
16951, "EVA Max Tol%"
16952, "  RSS"
16953, " RSS "
16954, "  EVA"
16955, " EVA "
16956, ""
16957, ""
16958, "%E           ,     ."
16959, "%E   ,  PEAK_Y(V(OUT),1,1)"
16960, "%E       ."
16961, "%W   ,      ."
16962, "%  ,  V(OUT)"
16969, "%E          (    None)."
16970, "%E Neg  Pos       0."
16971, "%E    ,      .          ."
16972, ""
16975, "    ."
16976, "    .."
16977, "       ."
17012, "     ."
17014, "       ."
17015, "         ."
17051, " ,       -.\nLoad MC File"
17070, "  "
17071, "  "
17072, " "
17073, " "
17074, " "
17075, " "
17076, " "
17098, " "
17099, " "
17102, "    X  Y    ,     ."
17105, "       "
17106, " "
17107, "     "
17108, "   ,     "
17109, "  ,    "
17110, "        "
17112, "   - ,        "
17113, "          "
17114, "    "
17115, "   (   )   "
17116, "    (   )"
17117, "    "
17118, "        "
17120, "    "
17121, "     \" \"."
17122, "       "
17123, " ,       F2."
17126, "  ,     ."
17127, "    X[,][;]."
17128, "    Y  -      "
17129, "    X.  <>[,<>[,< >[,<  >]]]"
17130, "    Y.  <>[,<>[,< >[,<  >]]]"
17150, "      ."
17151, "      ."
17155, "         ."
17157, "   SMPTE  F1, F2,   F1/F2   F2."
17158, "       ,      ."
17159, "        ."
17160, "   CCIF  F1, F2,   F1/F2   F2."
17161, "   DIN  F1, F2,   F1/F2   F2."
17168, "         PSS."
17170, "    \nStatistics"
17171, "    , ,  "
17172, "    X  Y\n"
17175, "           .\n   "
17176, " ,      .\n "
17177, "        \n  "
17178, "    Y      X \n Y  X"
17180, "  Watch,        .\nWatch"
17181, "      -        \n"
17182, "      Breakpoints"
17183, "  .\n "
17184, "      X-\n  X=..."
17185, "      Y-\n  Y=..."
17186, "       \n  "
17187, "       \n  "
17188, "           "
17189, "           .\nTag Vertical"
17190, "       \nAlign Cursors"
17194, "          .\nKeep Cursors on Same Branch"
17195, "            .\nGo  "
17196, "Go To Branch."
17198, "  .\n   "
17200, "      .\n     "
17206, "        bmp.\nCopy to Clipboard (BMP)"
17207, "          X / Y\n "
17208, "     \n  "
17209, "      \n "
17210, "       X\n  X"
17211, "       Y\n  Y"
17213, "    \n"
17215, "         \nDelete Cut Wire"
17216, "   .\nExit analysis"
17217, "   \n "
17218, "       \nReplace"
17219, "         BMP\nCopy selected to Clipboard (BMP)"
17221, "        WMF\nCopy selected to Clipboard (WMF)"
17222, "    .\n      ( emf, wmf   ,  bmp -  )"
17223, "        EMF\nCopy selected to Clipboard (EMF)"
17224, "     \nMake Macro"
17227, "         BMP.\nCopy     "
17228, "    SPICE-  SPICE-"
17230, "      .\nTF"
17238, "     .\nGo  "
17239, "      \n"
17240, "      \n"
17280, "  ,     .\n  "
17281, "    .\n "
17282, "  ,     .\n  "
17291, "   .\n  "
17292, "  .\n  "
17293, " .\nExit "
17298, "     .\n    "
17302, "    ,   .\nDefault Main Tool Bar"
17303, "        \n   "
17304, "       \n    "
17305, "  \n  "
17306, " ,       .\n Windows"
17307, "..."
17309, "     \nShape Editor"
17314, "          .\nCheck Model Library Parameters"
17317, "     \n  "
17320, "        \n  "
17322, "         .\n   "
17323, "E&xit"
17330, "  \n"
17366, "    -.\nAdd -"
17371, "    -."
17381, "    -.\n  -"
17400, "     \n  "
17401, "    .\n    "
17402, "    \n  "
17403, "  ,   \n "
17404, "      \n "
17405, "     \n  "
17406, "   ,   \n "
17407, "        \n  "
17408, "        \n-"
17409, "    .\nOne Border"
17410, "   ,   ,   \n , , "
17411, " , ,     lr10Last"
17412, " , ,     RMS .\nRMS"
17413, " , ,     AVG \nAverage"
17414, " , ,     \n"
17420, "     \n "
17421, "      \nGrid None"
17422, "  \nNormal Grid"
17423, "Normal grid with bold marks every 5 grids.\nGrid Bold 5"
17424, "Normal grid with bold marks every 6 grids.\nGrid Bold 6"
17425, "Normal grid with bold marks at an interval specified on the Circuit Properties dialog box.\nGrid Bold User"
17426, "Displays a graph paper grid in the schematic background.\nGraph Paper"
17430, "Bold Grids User (%d)"
17450, "Changes the color of selected item.\nColor"
17451, "Changes the style of selected item.\nStyle"
17452, "Changes the font of selected item.\nFont"
17453, "Displays all possible digital paths.\nAll Paths"
17454, "Renames all component names using standard conventions.\nRename Components"
17455, "Renames all symbolic names that conflict with node text by adding an underscore character.\nRename Defines"
17456, "This resets all of the display values to their original positions.\nReset Node Positions"
17457, "Calculates the standard values needed to come close to the current value of the impedance elements.\nFit to Standard Value"
17460, "Selects options for a Monte Carlo run.\nMonte Carlo Options"
17461, "Specifies a the number of Monte Carlo runs."
17462, "Selects a normal or Gaussian distribution."
17463, "Selects a linear distribution."
17464, "Selects a worst case distribution."
17465, "Boolean condition statement that specifies when to add an exception report to the numeric output."
17466, "Shows available performance functions."
17467, "Enables Monte Carlo runs."
17468, "Disables Monte Carlo runs."
17469, "Defines the seed for the random number generator within Monte Carlo. Seed must be >0 to produce a repeatable sequence."
17470, "Runs the first simulation with no toleranced parameters."
17471, "Invokes the Tolerance dialog box to easily add tolerances to circuit parameters."
17481, "Places the seed value used in the previous run into the Seed field."
17500, "Automatically scales the Circuit to fit the page.\nAuto Scale"
17501, "Removes all splitters that have been placed in the window\nRemove Splitters"
17502, "Evenly spaces out all splitters in the window.\nSpace Splitters Evenly"
17503, "Splits the window vertically.\nSplit vertically"
17504, "Zoom-in on active window.\nZoom In"
17505, "Zoom-out on active window.\nZoom Out"
17506, "Places the panel in the schematic view.\nPanel"
17507, "Splits the window horizontally.\nSplit horizontally"
17508, "Toggles the component panel size between the users last size and an auto size.\nToggels Panel Size"
17509, "Enables the window tabs bar.\nWindow Tabs"
17541, "Toggles display of User palette 1.\nUser palette 1"
17542, "Toggles display of User palette 2.\nUser palette 2"
17543, "Toggles display of User palette 3.\nUser palette 3"
17544, "Toggles display of User palette 4.\nUser palette 4"
17545, "Toggles display of User palette 5.\nUser palette 5"
17546, "Toggles display of User palette 6.\nUser palette 6"
17547, "Toggles display of User palette 7.\nUser palette 7"
17548, "Toggles display of User palette 8.\nUser palette 8"
17549, "Toggles display of User palette 9.\nUser palette 9"
17561, "Enables Select mode. Click on an object to select it or drag to select a region.\nSelect Mode"
17562, "Enables Component mode. Click in the schematic to add the selected device.\nComponent Mode"
17563, "Enables Text mode. Click text.\nText Mode"
17564, "Enables Orthogonal Wire mode. Click and drag to add a wire at 0, 90, 180, 270 degrees.\nWire Mode"
17565, "Enables Diagonal Wire mode. Click and drag to add a wire at any angle.\nDiagonal Wire Mode"
17566, "Enables Bus mode. Click in the schematic to create the bus connection.  Use Wire mode to draw the bus wire.\nBus Mode"
17567, "Activates Component Help mode. Click on a component to see its parameter syntax.\nHelp Mode"
17568, "Enables Line Drawing mode. Click and drag to add a line.\nLine Mode"
17569, "Enables Ellipse Drawing mode. Click and drag to add an ellipse.\nEllipse Mode"
17570, "Enables Rectangle Drawing mode. Click and drag to add a rectangle.\nRectangle Mode"
17571, "Enables Diamond Drawing mode. Click and drag to add a diamond.\nDiamond Mode"
17572, "Enables Arc Drawing mode. Click and drag to add an arc.\nArc Mode"
17573, "Graphical left brace. Click and drag to add a brace.\nLeft Brace Mode"
17574, "Graphical right brace. Click and drag to add a brace.\nRight Brace Mode"
17575, "Graphical left and right brace pair. Click and drag to add a brace pair.\nBrace Pair Mode"
17576, "Enables Scale mode for analysis Window.\nScale Mode"
17577, "Enables Cursor mode for analysis Window.\nCursor Mode"
17578, "Enables Pie Drawing mode. Click and drag to add a pie.\nPie Mode"
17579, "Enables Flag mode. Click in the schematic to plant a flag.\nFlag Mode"
17580, "Enables Info mode. Click on a component to show its model, timing, or subcircuit description.\nInfo Mode"
17581, "Enable Horizontal Measure mode. Click and drag to measure horizontal delta.\nHorizontal Tag Mode"
17582, "Enable Vertical Measure mode. Click and drag to measure vertical delta.\nVertical Tag Mode"
17583, "Enable Tag mode. Click on the plot to add a data point tag.\nTag Mode"
17584, "Enables Point-to-end Path mode. Click on a gate to show its possible paths.\nPoint to End Paths Mode"
17585, "Enables Point-to-point Path mode. Click on two gates to show paths between.\nPoint to Point Paths Mode"
17586, "Invokes a menu of graphical objects for placement in the window.\nGraphics"
17587, "Enables Picture mode. Click to add a picture.\nImport Picture Mode"
17588, "Enables Closed Polygon mode. Click for points and double click to close.\nClosed Polygon"
17590, "Enables Probe mode. Click in the schematic to display the associated waveform.\nProbe"
17591, "Enables Function Tag mode. Click in the plot to place a function tag.\nFunction Tag Mode"
17592, "Enables File Link mode.  Click on a component to view its linked file.\nFile Link Mode"
17593, "Enables Region Enable mode.  Drag in the schematic to create a boolean defined enable region.\nRegion Enable"
17594, "Enables Title Block mode.  Click in the schematic to place a title block.\nTitle Block Mode"
17595, "Enables Star Drawing mode.  Click and drag to add a star.\nStar Mode"
17596, "Enables Check mode. Click in the schematic to add a Check Box.\nCheck Box Mode"
17597, "Enables Triangle mode. Click in the schematic to add a Check box.\nTriangle Mode"
17598, "Enables Spreadsheet mode. Click in the schematic to add a spreadsheet.\nSpreadsheet Mode"
17600, "Enables Open Polygon mode. Click for points and double click to end.\nOpen Polygon"
17601, "Enables Include Shape mode. Lets you include another shape in the current shape.\nInclude Shape Mode"
17602, "Enables Pan mode. Click and drag in the drawing area to pan.\nPan"
17603, "Enables Block mode. Click and drag to create a general Block symbol.\nBlock"
17604, "Enables Text mode. Click in drawing area to add text.\nText"
17605, "Enables the seven segment primitive drawing mode.\nSeven Segment"
17606, "Enables the digital LED primitive drawing mode.\nDigital LED"
17607, "Enables the animated switch primitive drawing mode.\nSwitch"
17608, "Enables the SPST switch primitive drawing mode.\nSPST Switch"
17609, "Enables the SPDT switch primitive drawing mode.\nSPDT Switch"
17610, "Enables the DPST switch primitive drawing mode.\nDPST Switch"
17611, "Enables the traffic light primitive drawing mode.\nTraffic Light"
17612, "Enables the animated meter primitive drawing mode.\nMeter"
17613, "Enables the analog bar primitive drawing mode.\nAnalog Bar"
17614, "Enables the relay primitive drawing mode.\nRelay"
17615, "Enables the analog LED primitive drawing mode.\nAnalog LED"
17616, "Enables the analog LED Circle primitive drawing mode.\nAnalog LED Circle"
17617, "Enables the motor primitive drawing mode.\nMotor"
17618, "Enables the current arrow drawing mode.\nCurrent Arrow"
17619, "Bring object to the front.\nBring To Front"
17620, "Send object to the back.\nSend To Back"
17621, "Selects the next object in a stack of overlapping objects.\nNext Object"
17622, "Runs transient analysis on the active circuit.\nTransient"
17623, "Runs AC analysis on the active circuit.\nAC"
17624, "Runs DC analysis on the active circuit.\nDC"
17625, "Runs transient analysis in Probe mode.\nProbe Transient"
17626, "Runs AC analysis in Probe mode.\nProbe AC"
17627, "Runs DC analysis in Probe mode.\nProbe DC"
17628, "Runs AC analysis and displays AC voltage, current, and power values on the schematic.\nDynamic AC"
17629, "Runs DC analysis and displays DC voltage, current, and power values on the schematic.\nDynamic DC"
17630, "Runs transient analysis and computes harmonic distortion using FFT functions.\nHarmonic Distortion"
17631, "Runs transient analysis and computes intermodulation distortion using FFT functions.\nIntermodulation Distortion"
17632, "Runs AC analysis and computes the phase and gain margins.\nStability"
17669, "Toggles between the drawing and text area.\nToggle Area"
17670, "Shuttles text between the schematic and a text page.\nMove Text"
17672, "Toggles between Select mode and the other most recent mode.\nToggle Mode"
17675, "Toggles the Vertical waveform selection in a Probe analysis.\nToggle Selection Mode"
17680, "The Status Bar"
17690, "Run a script stored in the loaded batch file.\nRun Script"
17750, "%EThere is an environment variable with an illegal setting."
17751, "Shows the Contents screen of the Help system.\nHelp Contents"
17752, "Search for Help On.\nHelp Search"
17753, "Product Support.\nProduct Support"
17754, "Provides a list of helpful tips.\nTips"
17755, "Shows a list of Micro-Cap 12's major new features.\nNew features"
17756, "Micro-Cap copyright notice.\nAbout"
17757, "Invokes the help topic for a selected SPICE keyword.\nSpice Help"
17759, "The Help file failed to load.\nDo you want to try and load it from the web?"
17802, "Don't change the mode at the end of the run."
17820, "Runs all of the demos.\nGeneral Demo"
17821, "Demonstrates the use of 3D plots.\n3D Plots Demo"
17822, "Demonstrates adding new parts to the model libraries.\nAdding New Parts Demo"
17823, "Demonstrates the use of mixed-mode circuits.\nAnalog and Digital Demo"
17824, "Demonstrates the use of the analyses.\nDemo analyses"
17825, "Demonstrates the use of the animation mode.\nDemo animation"
17826, "Demonstrates the use of the Dynamic DC analysis.\nDemo DC"
17827, "Demonstrates the use of the Filter Designer.\nDemo Filter"
17828, "Demonstrates the use of the FFT capabilities.\nDemo FFT"
17829, "Demonstrates the use of the Monte Carlo analysis.\nDemo Monte Carlo"
17830, "Demonstrates the use of performance plots.\nDemo performance"
17831, "Demonstrates the use of the probe analysis feature.\nDemo Probe"
17832, "Demonstrates how to create a schematic.\nDemo schematic"
17833, "Demonstrates Worst Case Analysis.\nDemo Worst Case Analysis"
17834, "Demonstrates the use of the stepping feature.\nDemo Stepping"
17836, "Demonstrates the use of the Transfer Function analysis.\nDemo Transfer Function"
17837, "Demonstrates the use of circuit optimizer.\nDemo Optimizer"
17838, "Demonstrates the use of RF tools, including S-Parameter two-ports and Smith charts.\nDemo RF"
17839, "Demonstrates the use of the Dynamic AC analysis.\nDemo Dynamic AC"
17840, "Demonstrates the use of the IBIS translator.\nDemo IBIS"
17841, "Demonstrates Stability Analysis\nDemo Stability Analysis"
17842, "Demonstrates the use of the .measure command\nDemo .measure command"
17850, "Provides help in downloading the latest version of the program.\nUpdate"
17851, "Accesses the User's Guide.\nUser's Guide"
17852, "Accesses the Reference Manual.\nReference Manual"
17853, "Loads the Spectrum Software website.\nWeb"
17854, "Register your copy of Micro-Cap online.\nRegistration"
17873, "Sets the outline color of the selected objects.\nLine"
17874, "Sets the fill color of the selected objects.\nFill"
17877, "Sets the fill color of the selected object."
17878, "Sets the outline color of the selected object."
17881, "Left Click to select the curve: Right Click for the Waveform Menu"
17882, "Left Click to select the curve"
17883, "Left Click to place the Left Cursor on the curve: Right Click to place the Right Cursor on the curve"
17884, "Text page for notes and action statements such as .DEFINE .MODEL and .SUBCKT."
17885, "The Info page shows the name and location of the models used in the analysis."
17886, "Text area"
17887, "Drawing area"
17888, "Wait"
17889, "Splitter: Double click to add or remove."
17892, "Tool bar"
17894, "Scroll bar"
17895, "Processing nodes."
17896, "Rewiring."
17898, "Hit %s to continue."
17899, "Double-click in the window for more options."
17900, "Double-click in the window for more options. Drag with the right mouse button to rotate the surface."
17901, "Use the cursor Up Arrow and Down Arrow keys to increment the part value."
17902, "Processing macros."
17903, "Processing subcircuits %s %s."
17904, "Remapping nodes."
17905, "Processing digital components."
17906, "Checking for voltage loops."
17907, "Scan for AtoD interface."
17908, "Processing device expressions."
17909, "Clearing arrays."
17910, "Click on a node or a part."
17911, "Click mouse to add additional vertices, or ESC to close the polygon."
17912, "Adding break points."
17913, "Select one or more batteries, resistors, capacitors, or inductors. Cursor keys change the values."
17914, "Select one or more batteries or resistors. Cursor keys change the values."
17915, "Processing K Devices."
17916, "Equation setup."
17917, "Process limits."
17918, "Alloc Graphs Arrays."
17919, "Setup .IC."
17920, "Updating Spice file."
17921, "Updating Secondary Windows."
17927, "Component Palette."
18001, "Closes this dialog box and saves any changes you have made."
18002, "Closes this dialog box without saving any changes you have made."
18009, "Invokes the help topic.\nHelp"
18012, "Saves all changes you have made without closing this Dialog box."
18022, "Changes the font."
18030, "Line"
18031, "Ellipse"
18032, "Rectangle"
18033, "Diamond"
18034, "Arc"
18035, "Pie"
18036, "Vertical Tag"
18037, "Point Tag"
18038, "Function Tag"
18039, "Horizontal Tag"
18040, "Picture"
18041, "Polygon"
18042, "Text"
18043, "{"
18044, "}"
18045, "{}"
18046, "Region Enable"
18047, "Title Block"
18048, "Star"
18049, "Triangle"
18050, "Marker"
18051, "Spreadsheet"
18052, "Parallelogram"
18053, "Data"
18054, "Process"
18055, "Off-page Connector"
18056, "Punch Card"
18057, "Manual Input"
18058, "Predefined Process"
18059, "Internal Storages"
18060, "Manual Operation"
18061, "Document"
18062, "Multidocument"
18063, "Stored Data"
18064, "Delay"
18065, "Summing Junction"
18066, "Or"
18067, "Collate"
18068, "Sort"
18069, "Preparation"
18070, "Terminator"
18071, "Punched Tape"
18072, "Sequential Access Storage"
18073, "Magnetic Disk"
18074, "Direct Access Storage"
18075, "Display"
18076, "Alternate Process"
18077, "Decision"
18078, "Connector"
18100, "Accesses the Stepping dialog box.\nStepping"
18101, "The part, model, or variable name"
18102, "The attribute or model parameter to be stepped."
18103, "The starting value"
18104, "The ending value"
18105, "The step value"
18106, "Steps in a linear fashion. New = Old + Step Value"
18107, "Steps in a log fashion. New = Old * Step Value "
18108, "Steps through the listed values."
18109, "Selects simple (non-model) components."
18110, "Selects models."
18111, "Selects symbolic variables, created by .define or .param statements)"
18112, "This selects temperature for stepping in Dynamic DC."
18113, "Enables stepping of the parameters shown on the panel."
18114, "Disables stepping of the parameters shown on the panel."
18116, "Steps all variables simultaneously."
18117, "Steps variables in nested loops"
18122, "This selects the start or next step value."
18123, "This ends the stepping process."
18124, "Suggests suitable From, To and Step values based upon the current value."
18125, "Enables stepping of the parameters on all panels."
18126, "Disables stepping of the parameters on all panels."
18179, "Extract"
18180, "Merge"
18202, "Weight (thickness) of the border"
18204, "The solid color or the top color of the gradient"
18205, "The gradient bottom color"
18206, "Default border color"
18209, "The number of instances of the text in the horizontal direction"
18210, "The distance between instances of the text in the horizontal direction"
18211, "The number of instances of the text in the vertical direction"
18212, "The distance between instances of the text in the vertical direction"
18213, "Allows insertion of special characters from menus.\nInsert special characters"
18221, "The text angle in degrees. Horizontal text = 0 degrees"
18230, "Specifies the text as Pin Text which displays only when the mouse hovers above the pin icon."
18231, "Treats all text between the specified delimiters [ ] as a formula to be computed."
18232, "Specifies the formula delimiters. Typical delimiters are [ ] and { }."
18234, "Specifies that the text is to be RTF (Rich Text Format). This let's you control the font and color of individual characters."
18235, "Helps to build some command statements such as .Measure, .Define, .Help, .Warning., or .Parameters\nBuild Command"
18237, "This is the vertical text anchor point. Text will hangs from either Bottom or Top"
18238, "This is the horizontal text anchor point. Text will hangs from either Center, Left or Right"
18239, "This enables the grid snap feature. If enabled, the text anchor point snaps to the nearest grid."
18240, "Specifies the thickness of the text outline."
18241, "Increments/decrements the value of this field"
18370, "Name"
18371, "Path"
18376, "Fits a linear or polynomial equation to a specified waveform.\nCurve Fit"
18400, "Marks the actual analysis data points.\nData Points"
18401, "Produces ruler tick marks for the analysis grid.\nRuler"
18402, "Applies tokens to the waveforms.\nTokens"
18403, "Adds major grid lines to the horizontal axis.\nHorizontal Axis Grids"
18404, "Adds major grid lines to the vertical axis.\nVertical Axis Grids"
18405, "Adds minor grid lines to any log axis.\nMinor Log Grids"
18406, "Adds a zero-valued baseline.\nBaseline"
18407, "Draws a \"+\" at the intersection of the horizontal and vertical grids, if they are enabled.\nPlus Mark"
18408, "Adds minor grid lines to any log axis in a 2/5/10 format.\nMinor Log Grids 2 5"
18409, "Labels minor grid lines when they are displayed in the analysis.\nLabel All Minor Grids"
18410, "Accesses option, limit, and control parameters.\nGlobal Settings"
18411, "Accesses a list of preference items.\nPreferences"
18412, "Displays the contents of the MCAP.INC text file which contains definitions available to all circuits.\nMCAP.INC"
18413, "This page lets you edit the colors available to Micro-Cap."
18414, "Loads a library of .Measure statements that can be used in any circuit file.\nMeasure.lib"
18415, "Displays a horizontal line marking the crossover for the phase or gain margin in Stability analysis.\nMargin Line"
18416, "Displays an arrow showing the phase or gain margin in Stability analysis.\nMargin Arrow"
18417, "Displays Phase and Gain Margin text on the Open plot."
18418, "Displays Phase and Gain Margin text on the Nyquist plot."
18419, "Lets you review or edit new circuit properties, for example color, font, and numeric format.\nDefault Properties For New Circuits"
18420, "Loads the NOM.LIB file from the LIBRARY folder.\nNOM.LIB"
18421, "Loads the logs files\nLogs"
18431, "Opens the Tool bar menu.\nMain Tool Bar"
18432, "Displays this Status bar for quick information.\nStatus Bar"
18438, "Default Properties For New Circuits"
18440, "Adds a horizontal cursor.\nHorizontal Cursor"
18451, "%d Digit Scientific"
18452, "%d Digit Engineering"
18453, "%d Digit Decimal"
18454, "%d Digit Default"
18470, "This page lets you edit the font used within the status bar."
18471, "Displays the threads count in the Status Bar."
18472, "Displays coordinates of the window in the Status Bar."
18473, "Displays the time in the Status Bar."
18485, "Selects a 2D or a 3D histogram."
18500, "Translates an LBR binary model library to an LIB text file model library containing model statements.\nConvert to SPICE Library"
18502, "Translates an LIB text file model library to an LBR binary model library containing model parameters.\nConvert to Binary Library"
18505, "This lets you migrate selected files from an earlier version of Micro-Cap.\nMigrate"
18506, "Creates a Bill of Materials for the circuit.\nBill of Materials"
18507, "Prints the active window to the printer directly skipping the Print Preview.\nPrint Window"
18508, "Saves the file in encrypted format. If protected, a user defined password must be supplied to open the file.\nProtect File"
18509, "Creates SPICE compatible models from IBIS files.\nIBIS"
18510, "Converts Touchstone files to other Touchstone parameter formats.\nTouchstone Files"
18511, "Creates PCB netlists.\nPCB netlists"
18512, "Prints the selected region using the current screen scale.\nPrint Select Region"
18650, "Close All\nClose All"
18670, "Advances to the next simulation data point in Cursor mode.\nNext Simulation Data Point"
18671, "Advances to the next rounded and interpolated data point in Cursor mode.\nNext Interpolated Data Point"
18672, "Advances to the local high in Cursor mode.\nPeak"
18673, "Advances to the local low in Cursor mode.\nValley"
18674, "Advances to the global high in Cursor mode.\nHigh"
18675, "Advances to the global low in Cursor mode.\nLow"
18676, "Advances to the inflection point in Cursor mode.\nInflection"
18677, "Finds the highest point on all curves.\nGlobal High"
18678, "Finds the lowest point on all curves.\nGlobal Low"
18685, "Finds the data point with the smallest Y value of all branches of the selected curve at the current cursor position.\nBottom"
18686, "Finds the data point with the largest Y value of all branches of the selected curve at the current cursor position.\nTop"
18687, "Labels branches of a curve with their stepped or case number values.\nLabel Branches"
18688, "Lets you specify data points to be labeled.\nLabel Data Points"
18689, "Adds a marker (vertical or horizontal line, or circle) to the plot area containing the selected wavefrom.\nMarker"
18699, "Lets you control the number of data points saved.\nReduce Data Points"
18711, "%E%s's Initial value must be greater than or equal to its Low value."
18712, "%E%s's High value must be greater than its Low value."
18713, "%E%s's Initial value must be less than or equal to its High value."
18809, "Sets the initial background pattern of graphical objects."
18810, "Sets the initial line pattern of graphical objects."
18811, "Sets the initial line thickness of graphical objects."
18822, "Applies the Border/Line color, weight, and pattern choices to analysis text,\nin addition to graphical objects and tags."
18823, "Applies the Fill color and pattern choices to analysis text,\nin addition to graphical objects and tags."
18830, "This enables the grid snap feature. If enabled, the object snaps to the nearest grid."
19001, "Description: Mandatory model name\nSyntax: <name>\nExamples: IRF710, 2N2222A, OP-02"
19002, "Description: Optional model name\nSyntax: [name]\nExample: RMODEL"
19003, "Description: Primary inductance, secondary inductance, coupling coefficient.\nSyntax: <Primary Inductance>, <Secondary Inductance>,<Coupling Coefficient>\nExample: 1m,10m,.98"
19004, "Description: Smoke\nSyntax: [name]\nExample: LOW_POWER"
19005, "Description: Multiplier, length (m), width (m), drain and source areas (m*m) and peripheries (m), number of drain, source, gate, and body squares, OFF keyword, initial conditions.\nSyntax: [M=val] [L=val] [W=val] [AD=val] [AS=val] [PD=val] [PS=val] [NRD=val] [NRS=val] [NRG=val] [NRB=val] [OFF] [IC=vds[,vgs[,vbs]]]\nExample: M=2 L=100u W=100u IC=6,2,.5"
19006, "Description: List of inductor names that are coupled.\nSyntax: <L1 L2...<Ln>>\nExample: L1 L2 L3"
19007, "Description: Required coupling value\nSyntax: <coupling value>\nExample: .999"
19008, "Description: Subcircuit name\nSyntax: <subckt name>\nExample: OP01"
19009, "Description: File name\nSyntax: [file name]\nExample: OP02.LIB"
19010, "Description: List of parameter names with optional default values\nSyntax: <<name>=<value>>*\nExample: L=1u C=2p Gain=20"
19011, "Description: List of text parameter names with optional default values\nSyntax: <<name>=<text value>>*]\nExample: MYFILE.OUT"
19012, "Description: File Name"
19013, "Description: Macro name\nSyntax: %s\nExample: CLIP"
19014, "Description: This attribute defines the nonlinear function expression.\nSyntax: <expr>\nExample: 1.5+2*sin(2*PI*1E6*t)+25*IB(Q1)"
19015, "Description: This attribute defines the nonlinear function expression.\nSyntax: <expr>\nExample: 1.5+2*sin(2*PI*1E6*t)+25*IB(Q1)"
19016, "Description: Two or more ordered pairs describing the transducer input/output characteristic curve\nSyntax: <<input value>,<output value>>\nExample: (0,0) (1.5,3) (10,26)"
19017, "Description: Set of frequency, magnitude, and phase values\nSyntax: <<frequency value>,<magnitude value>,<phase value>>*\nExample: (0,1,90) (1k,3,120) (3k,2.6,88)"
19018, "Description: This attribute defines the Laplace expression.\nSyntax: <expression using S variable>\nExample: 1/(1+.001*s+1E-8*s*s)"
19019, "Description: Polynomial keyword, pin names, coefficients\nSyntax: [POLY(<n>)] NC1+ NC1- [NC2+...][P0 P1...]\nExample: POLY(2) 10 0 5 0 0 0 0 0 1"
19020, "Description: Polynomial keyword, source names, coefficients\nSyntax: [POLY(<n>)] VN1 [VN2...][P0 P1...]\nExample: POLY(3) V1 V2 V3 0 1 1 1"
19021, "Description: Timing model name\nSyntax: <name>\nExample: DLY_TTL"
19022, "Description: I/O model name\nSyntax: <I/O model name>\nExample: IO_HC"
19023, "Description: Digital delay selector. 0=DIGMNTYMX 1=Min 2=Typ 3=Max 4=Worst Case\nSyntax: <value>\nExample: 2"
19024, "Description: Interface subckt select value\nSyntax: <value>\nExample: 0"
19025, "Description: Digital power node name\nSyntax: <node name>\nExample: $G_DPWR"
19026, "Description: Digital ground node name\nSyntax: <node name>\nExample: $G_DGND"
19027, "Description: Digital stimulus format array\nSyntax: <format array>\nExamples: 11 (two binary outputs), 44 (four hex output)"
19028, "Description: Symbolic name for the array of digital values shown in the Edit window.\nSyntax: <command>\nExample: See samples in Help under Stimulus Generators."
19029, "Description: Scale factor to multiply the time clock values specified using the 'c' character to get real time.\nSyntax: <value>\nExample: 1ns"
19030, "Description: Logic string used extensively in model text files. Rarely used in schematics.\nSyntax: <logic text>\nExample: g3bar = {~G3}"
19031, "Description: Pin delay text used extensively in model text files. Rarely used in schematics.\nSyntax: <text>\nExample: DPWR DGND Y_O W_O ENAB D0 D1"
19032, "Description: Constraint text used extensively in model text files. Rarely used in schematics.\nSyntax: <text>\nExample: DPWR DGND DCBAR D0 D1 D2 D3 D4 D6 D7 SCBAR S2"
19033, "[<B|O|X>$<initialization data>$]"
19034, "Description: Optional PLA data. Overridden by file data, if FILE attribute is specified.\nSyntax: [<radix flag>$<program data>$]\nExample: B$01 01 10 11 01 11 01 10 01"
19035, "<controlling voltage source name>"
19036, "Description: Signal names for the FSTIM device\nSyntax: <stimulus file signal name>*]\nExample: B0 B1 B2 B3"
19037, "Description: Optional text \nSyntax: [text]\nExample:"
19039, "[IS=Initial state]"
19040, "Description: This is the value or expression for the resistance, plus optional temperature coefficients.\nSyntax: <value | expression> [LOT[/#][/GAUSS|/UNIFORM|/WCASE]=[<tolvalue>[%]] | [<lowtolval>%,<hightolval>%]] [TC=<TC1>[,<TC2>]]\nExample: 1000 TC=1m,1u\nExample: 1000 Lot=10%"
19041, "Description: Diode area multiplier, plus optional OFF keyword, plus optional initial condition.\nSyntax: [area][OFF][IC=<vd>][M=value]\nExample: 2 OFF IC=2"
19042, "Description: Optional area multiplier, OFF keyword, and initial conditions.\nSyntax: [area][M=value][OFF][IC=<vbe>[,vce]]\nExample: 2 OFF IC=1,4"
19043, "Description: Optional area multiplier, OFF keyword, and initial conditions.\nSyntax: [area][M=value][OFF][IC=<vds>[,vgs]]\nExample: 3 OFF IC=6,2"
19044, "Description: Voltage value\nSyntax: <value>\nExample: 2.0"
19045, "Description: Optional frequency-dependent expression for use in AC and Stability only. Replaces VALUE above in AC and Stability only.\nSyntax: [expr]\nExample: 1e-4*(1+F/1e9)"
19046, "Description: Switch type keyword, Ron, Roff, On Level, Off Level\nSyntax: <[V]|[T]|[I]>,<n1,n2>[,<ron>[,<roff>]]\nExample: T,1m,5m\nExample: V,3,0,1m,1e6"
19047, "Description: Line parameters may be entered here or as a model (below).\nSyntax: [LEN=<val> R=<val> L=<val> C=<val> G=<val>] | \nZO=<val> [TD=<val>] | [F=<val> [NL=<val>]]\nExample: LEN=100 R=3m C=1p L=1.2n"
19048, "Description: This attribute defines the clock frequency for the Z expression.\nSyntax: <value>\nExample: 10k"
19049, "Description: The Z transfer function expression.\nSyntax: <expression using the Z variable>\nExample: (z*z+z)/pow(z-1,3)"
19050, "Description: DC value, AC magnitude, AC phase, transient analysis format parameters\nSyntax: [[DC]<value>] [AC<mag>[phase]] [PULSE] | [SIN] | [EXP] | [PWL] | [SFFM] [parameters]\nExample: DC 1.5 AC 1 SIN 0 5 60"
19051, "Description: The expression whose value is to be sampled.\nSyntax: <input expression>\nExamples: V(OUT), V(10)*I(V2)."
19052, "Description: The sampling period.\nSyntax: <value>\nExample: 5ns"
19053, "Description: Package type for PCB netlists. Click on the arrow in the VALUE field for a list of packages.\nSyntax: [Package Type]\nExample: DIP16"
19054, "<Gate Identifier>"
19055, "<Component Name for Layout>"
19056, "Description: Expression for calculating a frequency (F) dependent noise current in AC\nSyntax: <noise expression>\nExample: .026e-9/(1+F/1e10)"
19057, "Description: Controls the time precision of the transition.  Recommended range is 1m to 1u.\nSyntax: <expr>\nExample: 1e-4"
19059, "Description: Waveform expression from selected user waveform file\nSyntax: <expr>\nExample: V(1) vs T"
19060, "Description: Power consumption for Bill of Materials calculation of total circuit power used.\nSyntax: [value]\nExample: .07"
19061, "Description: Unit cost for Bill of Materials calculation of total circuit cost.\nSyntax: [value]\nExample: .07"
19062, "Description: Value or expression for computing capacitance value, plus an optional initial condition.\nSyntax: <value | expression> [LOT[/#][/GAUSS|/UNIFORM|/WCASE]=<tolvalue>[%]] [IC=<initial value>]\nExamples: 1u IC=6, 1u*(1+abs(V(C1)/100))\nExample: 1u LOT=10%"
19063, "Description: Transducer gain\nSyntax: <value>\nExample: 10.0"
19064, "Description: Value or expression for computing inductance value, plus an optional initial condition.\nSyntax: <value | expression> [LOT[/#][/GAUSS|/UNIFORM|/WCASE]=<tolvalue>[%]] [IC=<initial value>]\nExamples: .1 IC=2.3, .5*(1+atan(I(L1)/50))\nExample: .1 LOT=10%"
19065, "Description: User waveform file name\nSyntax: <name>\nExample: AMP1.USR"
19066, "Description: Keyword selects data format\nSyntax: [ [MAG|DB] | [RAD|DEG]] | [R_I]\nExample: MAG RAD"
19067, "Description: Voltage value\nSyntax: <value> [LOT[/#][/GAUSS|/UNIFORM|/WCASE]=<tolvalue>[%]]\nExample: 5.0"
19068, "Description: Current value\nSyntax: <value> [LOT[/#][/GAUSS|/UNIFORM|/WCASE]=<tolvalue>[%]]\nExample: 1.0"
19069, "Description: Tie name. Connects to other ties with the same name.\nSyntax: <name>\nExample: VCC"
19070, "Description: Digital state\nSyntax: <0|1|R|F|Z|X>\nExample: X"
19071, "To Add Help for a macro parameter add a .HELP %s  \"text\" to the macro file."
19072, "Syntax: [L=val] [W=val] [NF=val] [SA=val] [SB=val] [SD=val] [SCA=val] [SCB=val] [SCC=val] [SC=val] [MIN=val] [AD=val] [AS=val] [PD=val] [PS=val] [NRD=val] [NRS=val] [RBDB=val] [RBSB=val] [RBPB=val] [RBPS=val] [RBPD=val] [DELVTO=val] [XGW=val] [NGCON=val] [TRNQSMOD=val] [ACNQSMOD=val] [RBODYMOD=val] [RGATEMOD=val] [GEOMOD=val] [RGEOMOD=val]  [OFF] [TEMP=val] [IC=vds[,vgs[,vbs]]]\nExample: M=2 L=100u W=100u IC=6,2,.5"
19073, "Desc: length (m), width (m), drain/source areas (m*m) and peripheries (m), drain/source/gate/body squares, # of parallel devices, # of series devices, Scale parameter, Geometry parameter, device temperature, OFF keyword, ICs.\nSyntax: [M=val] [L=val] [W=val] [AD=val] [AS=val] [PD=val] [PS=val] [NRD=val] [NRS=val] [NRG=val] [NRB=val] [NP|M=val] [NS|N=val] [SCALE=val] [GEO=val] [TEMP=val] [OFF] [IC=vds[,vgs[,vbs]]]\nExample: M=2 L=100u W=100u IC=6,2,.5"
19074, "Sets the derivative method to be used for the individual function source.  Default uses the Global Settings value."
19075, "This is the number of times to repeat the user file waveform."
19076, "Defines a trigger expression that will initiate the start of the user waveform."
19077, "Description: Multiplier, length (m), width (m), drain and source areas (m*m) and peripheries (m), number of drain, source, gate, and body squares, OFF keyword, initial conditions.\nSyntax: [M=val] [L=val] [W=val] [AD=val] [AS=val] [PD=val] [PS=val] [NRD=val] [NRS=val] [NRG=val] [NRB=val] [NQSMOD=val] [ACNQSMOD=val] [OFF] [IC=vds[,vgs[,vbs]]]\nExample: M=2 L=100u W=100u IC=6,2,.5"
19078, "Description: Expression for computing charge value.\nSyntax: [expression] \nExample: SQRT(1+V(C1)^2)/V(C1)"
19079, "Description: Expression for computing flux value.\nSyntax: [expression] \nExample: 1u*ATAN(I(L2))"
19080, "Sets the number of data points used for the convolution method in transient analysis."
19081, "Sets the TMax for the convolution method in transient analysis where 1/TMax is the frequency sampling."
19103, "Defines the default font used as Grid Text."
19108, "Defines the color for components."
19109, "Defines the default font used as Attribute Text."
19110, "Description: Name of the file to be used for the Fit To Standard Values command\nSyntax: <file name>\nExample: standard.res"
19111, "Defines the color for wires."
19112, "Defines the color for Bus."
19113, "Defines the color for selected objects in Standard Select mode."
19114, "Defines the color for selected objects in Block Select mode."
19115, "Defines the color and font used for node numbers."
19116, "Defines the color for the Anchor."
19117, "Defines the color used for node voltages."
19118, "Defines the background color used for voltages in Dynamic AC."
19119, "Defines the color used for disabled objects."
19120, "Defines the color and font used for pin connections."
19121, "Defines the color used for Pin Markers, which are shown by double clicking on a component and checking 'Pin Markers'."
19122, "Defines the color of the box region."
19123, "Defines the color a path will be traced in a digital path operation."
19124, "Defines the highlight color of a node if Node Highlight in the Preferences is enabled."
19125, "Defines the color of an analysis grid."
19126, "Defines the color of the baseline."
19127, "Defines the color of an analysis background."
19128, "Defines the color and font used for analysis text."
19129, "Defines the color of any keyword used within the text page."
19130, "Defines the color of any text that creates an error within the text page."
19131, "Defines the background color used to highlight text that matches the search criteria."
19132, "Defines the waveform's graphical properties."
19133, "Description: Optional area multiplier, model parameters, OFF keyword, and initial conditions.\nSyntax: [AREA=<value>] [WB=<value>] [AGD=<value>] [KP=<value>] [TAU=<value>] [OFF] [IC=vgs[,vae[,vds[,veb]]]]\nExample: AREA=2 WB=120u OFF IC=10,5"
19134, "Defines the default color of the Curve Fit curve."
19135, "Defines the color of the encrypted text."
19148, "Digital 0 color."
19149, "Digital R color."
19150, "Digital F color."
19151, "Digital 1 color."
19152, "Digital X color."
19153, "Digital Z color."
19155, "Defines the color of text page comments denoted by the * or ; characters."
19156, "Defines the color of the associated background."
19157, "Defines the font used in text pages."
19158, "Defines the font color."
19159, "Defines the grid color."
19160, "Defines the wire color."
19161, "Defines the X background color."
19162, "Defines the Y background color."
19163, "Defines the Z background color."
19164, "Sets the high value color of the 3D plot when the User Patch Color is selected."
19165, "Sets the low value color of the 3D plot when the User Patch Color is selected."
19172, "Defines the text color used in text banners (as in Dynamic AC and DC)."
19173, "Defines the text background color used in text banners (as in Dynamic AC and DC)."
19174, "Defines the schematic grid color."
19175, "Defines title block border color."
19176, "Defines the schematic graph paper grid color."
19178, "Defines the font color."
19179, "Defines the grid color."
19180, "Defines the bar front color."
19181, "Defines the bar top/side color."
19182, "Defines the default background color."
19183, "Defines the color used for currents."
19184, "Defines the color used for power."
19185, "Description: The <input expression> is sampled whenever this <sample expression> is true\nSyntax: <sample expression>\nExample: (V(5,4) > 1.1) && (V(3) < 1.2)"
19186, "Controls the color of the waveform that the left cursor is on."
19187, "Controls the color of the waveform that the right cursor is on."
19188, "Sets the tracker color."
19189, "Sets the data point label color."
19190, "Applies any edits to all curves."
19191, "On state (High or Low) required to light the segments in a seven-segment display."
19192, "When the input expression is true, an event occurs. Elapsed time is set to zero and the count is incremented."
19193, "The voltage on the ELAPSED pin is equal to the elapsed time multiplied by this value."
19195, "This is the amount the counter is incremented each time an event occurs. It may be positive or negative."
19196, "This is the value on the COUNT pin when the RESET pin goes positive."
19197, "This is the minimum value on the COUNT pin."
19198, "This is the maximum value on the COUNT pin."
19199, "The state of the switch."
19200, "Scroll to first page tab."
19201, "Scroll page tabs to the left."
19202, "Scroll page tabs to the right."
19203, "Scroll to last page tab."
19204, "Scroll to first section tab."
19205, "Scroll section tabs to the left."
19206, "Scroll page tabs to the right."
19207, "Scroll to last section tab."
19208, "Sets the color and properties of the phase and gain margin lines."
19209, "Sets the color and properties of the phase and gain margin arrows."
19210, "Motor revolutions per second per volt across the control pins."
19211, "Motor series resistance."
19212, "Motor series inductance."
19213, "Relay series inductance."
19214, "Input current required to close the relay contacts."
19215, "Input current required to open the relay contacts."
19216, "This is the on resistance of the relay."
19217, "This is the off resistance of the relay."
19218, "This is the voltage required to turn the traffic lights on."
19219, "This is the color, voltage, current, resistance, and capacitance of the LED."
19220, "This is the low scale value of the meter."
19221, "This is the high scale value of the meter."
19222, "This is the scale factor(T,G,Meg,K,m,u,n,p,f) of the meter.\nThis option works only when Autoscale is Off."
19223, "If On this causes the meter to automatically adjust the scale.\nThis option is available only for analog meters."
19224, "This selects an analog or a digital display."
19225, "This selects whether the meter measures current or voltage."
19226, "This sets the voltage for the minimum height of the bar."
19227, "This sets the voltage for the maximum height of the bar."
19228, "This is the seed for random (?) values. The seed must be >0 to produce a repeatable sequence."
19229, "This is the DC input resistance of the meter:\nAmmeter default = .001.\nVoltmeter default = 1/GMIN."
19230, "Switch ON resistance."
19231, "Switch OFF resistance."
19232, "Description: All switches with the same group name are linked and behave the same. If NOT or ! precedes the name the behavior is reversed.\nSyntax: [[! | NOT] group_name].\nExample: group2\nExample: NOT grp3"
19233, "Input resistance of the relay coil."
19234, "If BIDIRECTIONAL is Yes, then the absolute (rather than the actual) value of the input current determines relay behavior.\n"
19236, "Specifies the name of the .WAV file to be used."
19237, "Specifies the channel number of the .WAV file to be used."
19238, "This is the number of times to repeat the wave file waveform."
19239, "Defines a trigger expression that will initiate the start of the wave waveform."
19240, "Scales the voltage of the wave file waveform."
19241, "Description: List of optional node connections.  Must connect to a node with a global node name ($G_name). \nSyntax: <<optional node>=<global node>>*\nExample: VDD=$G_VDD4000"
19242, "Defines color of label background."
19243, "Sets the color and properties of the phase and gain margin text."
19300, "Sets the grid color in the Model plots."
19301, "Sets the background color of the Model plot."
19302, "Sets the color of the Model plot curve"
19303, "Sets the color of the data points in the Model plot."
19304, "Sets the color and font of the X and Y scale text."
19305, "Description: Optional frequency-dependent expression for use in AC only. Replaces RESISTANCE above in AC only.\nSyntax: [expr]\nExample: 1e-4*(1+F/1e9)"
19306, "Description: Optional frequency-dependent expression for use in AC only. Replaces INDUCTANCE above in AC only.\nSyntax: [expr]\nExample: 1e-4*(1+F/1e9)"
19307, "Description: Optional frequency-dependent expression for use in AC only. Replaces CAPACITANCE above in AC only.\nSyntax: [expr]\nExample: 1e-4*(1+F/1e9)"
19520, "Specifies time where output is retained and plotted to the screen and/or printed to the numeric output."
19521, "Specifies the maximum time step for the run."
19522, "Determines the number of points to be printed in numeric output."
19523, "Specifies temperature values to be used for analysis. To[,From[,Step]]"
19524, "Specifies how many Retrace runs to do. The total run time will be this number times the Time Range."
19525, "Specifies ending time of the simulation."
19530, "Specifies frequency range of the simulation. fmax[,fmin]"
19531, "Determines the number of points for numeric output and analysis."
19533, "Specifies a limit on the rate of change of the first waveform."
19534, "Specifies the name of the source where input noise is calculated."
19535, "Specifies the nodes at which output noise is calculated. node1[,node2]"
19540, "Sets the secondary source sweep. Final[,Initial[,Step]]"
19541, "Specifies the name of the secondary source."
19542, "Sets the primary source sweep. Final[,Initial[,MaxStep]]"
19543, "Specifies the name of the primary source."
19544, "Determines the number of points calculated for numeric output."
19546, "Specifies a limit on the rate of change of the first waveform."
19547, "Specifies the part name of the Loop Gain Probe that will be used for the analysis."
19548, "Selects the method that will be used for the loop gain calculations."
19550, "Defines whether the X-axis is a linear or log scale."
19551, "Defines whether the Y-axis is a linear or log scale."
19552, "Defines the color of the waveform."
19553, "Places the waveform in the numeric output file."
19554, "Selects rectangular, polar, or Smith chart plot type."
19555, "Sets the waveform display status to one of three states: Green: Plot, Yellow: Save waveform but don't show  Red: Don't plot."
19556, "Allows moving, deleting, copying, pasting, and inserting waveforms."
19560, "Fundamental frequency for Fourier analysis and actual frequency of the input sine source."
19561, "Part name of the input source to be used in the analysis."
19562, "Amplitude of the input source to be used in the analysis. Format is High[,Low[,Step]]"
19563, "Name of load resistor."
19564, "Frequency range that the noise voltage will be calculated over for THD+N plots."
19566, "Simulation run time in terms of the number of fundamental cycles."
19567, "Tolerance used to stop the simulation as the waveform is assumed to have reached steady state."
19568, "Ratio used with the fundamental frequency to determine the maximum timestep."
19569, "Number of harmonics that will be used to calculate the total harmonic distortion values."
19571, "Smallest of two frequencies used in the Intermodulation Distortion calculation."
19572, "Largest of two frequencies used in the Intermodulation Distortion calculation."
19573, "Amplitude of the F1 input source to be used in the analysis. Linear/log format is High[,Low[,Step]]"
19574, "Amplitude of the F2 input source to be used in the analysis. Linear/log format is High[,Low[,Step]]"
19575, "Displays the combination of standard value elements needed to produce the current value.\nExample:1K+(100 | 47.5) means 1K in series with a parallel combination of 100 and 47.5."
19577, "Sets the Shape group from which the component will obtain its schematic shape."
19578, "Determines the number of points to be printed in numeric output for all time-domain waveforms."
19579, "Determines the number of points to be printed in numeric output for all frequency-domain waveforms."
19580, "Description: Touchstone File Name\nSyntax: <file name>\nExample: NEC5000.S2P"
19581, "Name of LO or clock source."
19582, "Smoke display text font and color"
19583, "Smoke display grid color"
19584, "Smoke display text pass color"
19585, "Smoke display text marginal color"
19586, "Smoke display text fail color"
19587, "Smoke display text invalid color"
19588, "Yes or No turns smoothing on or off. Inherit From Preferences uses the settings from the Preferences (Ctrl+Shift+P) dialog box."
19589, "For limit functions, the fraction of the interval between high and low values where smoothing begins. For TABLE functions, the fraction of the interval between X,Y points where smoothing begins. The fraction can be entered as a decimal(0.1) or a percent (10%)"
19590, "Determines whether smoothing interpolation is to be done logarithmically or linearly on each axis."
19591, "These are the %s parameters. Editing makes the parameters local to this circuit and saves them as a model statement in the text area."
19600, "Creates a SPICE text file description suitable for external SPICE simulators.\nCreate SPICE Netlist"
19601, "Creates a netlist suitable for SPICE2 compatible simulators."
19602, "Creates a netlist suitable for PSPICE compatible simulators."
19603, "Creates a netlist suitable for SPICE3 compatible simulators."
19604, "Creates a netlist suitable for HSPICE compatible simulators."
19605, "This is the PSPICE format with a few extensions unique to Micro-Cap."
19606, "Defines the file as an ambiguous SPICE format."
19607, "Defines the file as not being in any SPICE format."
19627, "Options"
19628, "Preferences"
19697, "Enables the Quick-help in-line assistance when entering analysis limits X and Y expressions."
19698, "Pixel width of the window splitter / drag bar. Use 15 or more with touch screens."
19699, "Enables the use of sound for illegal operations that don't invoke an error/warning dialog."
19700, "Enables the use of sound to denote when a simulation has finished running."
19701, "Enables the use of sound for warnings and errors."
19702, "Displays the toolbar bitmap, if defined, next to the command for items within a menu."
19703, "Adds a pair of parentheses to .DEFINE arguments. For example, .DEFINE A 1+2 becomes .DEFINE A (1+2)."
19705, "This option increments node text added as a result of a paste, step, drag copy, or mirror operation.\nIncrements Node text"
19706, "Reverts to Select mode in the schematic editor after any other action."
19707, "Shows the text area when a model statement is added."
19708, "Reverts to Select mode in the analysis after any other action."
19709, "Printouts would use the specified background color rather than the paper."
19710, "This option extends wires during drag operations to maintain connections.\nRubberbanding"
19711, "This option enables inertial cancellation in digital delays."
19712, "Sets the threshold limit that a symbolic derivative can hit before the numeric derivative is called as an alternative."
19713, "Adds a DC path to ground at all nodes."
19714, "Sets the cursor to the shape of the selected component in component mode."
19715, "Places the time in plots and other output files."
19716, "Places the date in plots and other output files."
19717, "The maximum number of parts in a Component menu column before it wraps to a new column. If 0 then don't wrap."
19718, "Automatically adds VCC and VEE power supplies and wires the OPAMP pins to the supplies."
19719, "Selects the Block Select display mode. In this mode the selected objects backgrounds are drawn."
19720, "Enables the Convergence Assistance routines."
19721, "Forces objects to originate on the nearest node.\nNode Snap"
19722, "When saving an EMF or WMF image file the background will be transparent."
19723, "Changes the curve that the cursor is on to the select color."
19724, "If the number of components in the schematic exceeds this value, the node numbers will only be recalculated when an analysis is entered."
19725, "Controls the maximum number of files shown in the File menu."
19726, "Controls the length of time that warnings will be displayed. The length is limited between 0 and 30 seconds."
19727, "Enables the analysis window to always be on top in probe."
19728, "Enables the progress display in the status bar."
19729, "Sets Tool bar icons to large size."
19730, "Restores default preferences."
19731, "Controls the maximum number of components in the recent component list."
19732, "Enables an automatic run when a circuit is edited when in an analysis mode.\nAuto Run"
19733, "Specifies the user name substituted for the $USER variable."
19734, "Specifies the company name substituted for the $COMPANY variable."
19735, "Enables the display of shapes when browsing the Component menu."
19736, "Highlights the wire and node name for a node when the mouse passes over it."
19737, "Imports components from a circuit file if those parts do not exist or are different than in the library."
19738, "Displays the full file path for each file reference in the Title bar."
19739, "Displays basic element information when the mouse is over the part."
19740, "When a part is cut/copied and then pasted, any associated Macro, Subckt, Localized File, model or define statement will also be moved with it."
19741, "Expands the information displayed for the element under the mouse cursor."
19742, "When enabled, all model parameters will be placed in alphabetical order when listed."
19743, "When enabled, the probe will drill down into a macro or subcircuit where waveforms can then be recalled."
19745, "When enabled, estimated entries will automatically be placed in the Stepping dialog box when a parameter is selected."
19746, "When enabled, the Help file will always stay on top of the Micro-Cap window."
19747, "Sets the number of data points that are calculated into a buffer prior to plotting. (max 127)"
19748, "When enabled, the group names in the Component panel are bolded."
19749, "When enabled, the Attribute dialog box will be automatically invoked as needed when a component is placed in the schematic."
19750, "Automatically loads each of the last used files, each time the program is run."
19751, "If checked, smoothing is enabled for Nonlinear Function and Table sources if Inherit From Preferences is selected in the Attribute dialog box for the source."
19752, "For limit functions, the fraction of the interval between high and low values where smoothing begins. For TABLE sources, the default fraction of the interval between X,Y points where smoothing begins. This is used for TABLE sources if Inherit From Preferences is selected for the source. The fraction can be entered as a decimal(0.1) or a percent (10%)."
19753, "Maximum number of recently used files to be auto-loaded when starting the program (0=no limit)."
19754, "Check .Define, .Func and .Array statements for Mismatched Parentheses and Braces."
19778, "Transparent"
19779, "Specifies the numeric format for optimized parameters."
19781, "Specifies the numeric format for analysis X scales."
19782, "Specifies the numeric format for analysis Y scales."
19783, "Specifies the numeric format for analysis Z scales."
19784, "Specifies numeric format for X values in Cursor mode tables and trackers."
19785, "Specifies numeric format for Y values in Cursor mode tables and trackers."
19786, "Specifies numeric format for Z values in Cursor mode tables and trackers."
19795, "Specifies the numeric format for any watch variables."
19796, "No Pattern"
19797, "No Fill"
19798, "No Color"
19800, "Black"
19801, "Maroon"
19802, "Green"
19803, "Olive"
19804, "Navy"
19805, "Purple"
19806, "Teal"
19807, "Light gray"
19808, "Dark gray"
19809, "Red"
19810, "Lime"
19811, "Yellow"
19812, "Blue"
19813, "Fuchsia"
19814, "Aqua"
19815, "White"
19816, "User defined color"
19865, "Current color of the object. Click to customize a color."
19999, "Restores the default color palette."
20026, "Tool Bar"
20027, "Defaults all buttons on the tool bar."
20028, "Defaults the selected button."
20104, "Places all buttons onto the tool bar."
20105, "Removes all buttons from the tool bar."
20110, "Places the tool bar at the top of the window."
20111, "Places the tool bar on the left side of the window."
20112, "Places the tool bar at the right side of the window."
20113, "Places the tool bar on the bottom of the window."
20115, "This lets you browse for the name of a component to add to the tool bar."
20117, "This lets type in the name of a component to add to the tool bar."
20199, "When wildcard names are used this enables a spectrum of colors to be used for the plots."
20202, "List of available waveforms."
20203, "Controls whether the waveform will be plotted or not."
20204, "Determines which graph the waveform will appear in."
20205, "Sets the waveform line thickness."
20206, "For stepped waveforms, enables a spectrum of colors to be used."
20207, "X expression of selected waveform."
20208, "Y expression of selected curve."
20210, "Automatically creates the title from the selected performance function."
20211, "List of available waveforms"
20212, "Sets the low range for the X axis."
20213, "Sets the low range for the Y axis."
20214, "Sets the high range for the X axis."
20215, "Sets the high range for the Y axis."
20216, "Auto scales the X axis."
20217, "Auto scales the Y axis."
20218, "If enabled, all curves in each plot group share a common Y scale.\nSame Y Scales"
20219, "Copies current X and Y scale and value formats to all waveforms."
20220, "If checked, all range edits are retained (copied to the Analysis Limits dialog box)."
20221, "Selects a log scale for the X axis."
20222, "Selects a log scale for the Y axis."
20223, "Slope calculation method for Cursor mode table."
20224, "Sets the X and Y grids to a static location in the plot window."
20225, "Spacing between X grids"
20226, "Spacing between Y grids"
20227, "Spacing between X bold grids"
20228, "Spacing between Y bold grids"
20229, "Sets the number of grids to be used when auto scaling the X range."
20230, "Sets the number of grids to be used when auto scaling the Y range."
20231, "Sets the Y scale of all waveforms in the plot group to the current Y values."
20300, "Title field"
20301, "Automatically creates the title."
20400, "Invokes the Package editor.\nPackage editor"
20402, "Defines the number of pins in the package."
20404, "Displays the component name for the selected package."
20406, "Adds a basic package where only one instance of the component is within the package."
20409, "Displays a list of all of the packages that are in the Package library."
20411, "Adds a complex package where more than one instance of the component is within the package."
20412, "Deletes the selected package."
20414, "Duplicates the selected package as a template for a new package."
20416, "Selects the first character of packages that will be displayed in the Package list."
20420, "Defines the package name specified for the component."
20421, "Package Name used when creating an Accel netlist file.  If blank, the Package field will be used."
20422, "Package Name used when creating an OrCad netlist file.  If blank, the Package field will be used."
20423, "Package Name used when creating a Protel netlist file.  If blank, the Package field will be used."
20424, "Package Name used when creating a PADS netlist file.  If blank, the Package field will be used."
20425, "Finds a package name within the Package library."
20426, "Creates a new file and adds it to the Package library.\nNew File"
20427, "Adds an existing file to the Package library.\nOpen File"
20428, "Merges a Package file on disk into the current Package file.\nMerge File"
20429, "Removes selected file from the Package library.\nRemove File"
20430, "Saves Package library.\nSave File"
20431, "Saves Package library under a new name.\nSave File As"
20433, "Displays the model information of the selected part."
20436, "Save Package Editor changes\nfor %s?"
20440, "Defines the component instance in the package that this pin is assigned to."
20441, "Defines the name of the pin that is used within Micro-Cap."
20442, "Defines the name of the pin that is used within the PCB netlist."
20443, "Total Packages %d"
20444, "Remove '%s' package file from the list?\n\nThe packages within the file will no longer be available to use in the schematic."
20492, "Monte Carlo choise."
20495, "Selects the input voltage branch that the window will be created for."
20497, "Selects the waveform branch that the operation will be performed on."
20499, "Selects the waveform branch that the operation will be performed on."
20501, "Temperature choice."
20552, "Stepped parameter choice."
20603, "Stepped parameter choice for X axis."
20613, "Performance function selector."
20614, "Performance function expression."
20615, "The low Y value for measuring rise time"
20616, "The high Y value for measuring rise time"
20617, "The low Y value for measuring fall time"
20618, "The high Y value for measuring fall time"
20619, "The Y value at which the width will be measured"
20620, "The Y value at which the X level will be measured"
20621, "The X value at which the Y level will be measured"
20622, "The low Y value at which the X delta will be measured"
20623, "The high Y value at which the X delta will be measured"
20624, "The low X value at which the Y delta will be measured"
20625, "The high X value at which the Y delta will be measured"
20626, "The low Y value at which the X range will be measured"
20627, "The high Y value at which the X range will be measured"
20628, "The low X value at which the Y range will be measured"
20629, "The high X value at which the Y range will be measured"
20630, "The X value at which the slope will be measured"
20631, "The starting point over which the function is measured"
20632, "The ending point over which the function is measured"
20633, "Specifies the instance to measure and plot"
20640, "Lets you review or edit the model parameter limit values.\nModel Parameter Limits Editor"
20700, "Automatically creates the title from the selected performance function."
20800, "&Expand..."
20801, "&Expand Lists"
20802, "Variables"
20803, "&Analysis Variables"
20804, "&Global Settings"
20807, "&Constants"
20808, "Symbolics"
20809, "&Functions"
20810, "&Operators"
20811, "Curve"
20812, "Buffers..."
20813, "Rename All Pages"
20814, "Renumber All Plots"
20850, "None"
20851, "Sort By Page"
20852, "Enable All for this Page"
20853, "Hide All for this Page"
20854, "Disable All for this Page"
20855, "Sort By Plot"
20856, "Enable All for this Plot"
20857, "Hide All for this Plot"
20858, "Disable All for this Plot"
20900, "Writing numeric output."
20901, "Conductance"
20902, "Capacitance"
20903, "Current"
20904, "Resistance"
20905, "Voltage"
20906, "Charge"
20907, "External Voltage"
20908, "Internal Voltage"
20909, "Power"
20910, "Beta"
20911, "Frequency"
20912, "Noise"
20913, "Transistor Gain"
20914, "Geometry"
20915, "Terms:"
20916, "Operating Point for Devices of Type %s"
20917, "AC values for %s (%s)"
20918, "DC Operating Point Voltages"
20919, "AC Voltages at Frequency=%g (%s)"
20920, "Variable 1 Method"
20921, "Variable 1 Name"
20922, "Variable 1 Range"
20923, "Variable 2 Method"
20924, "Variable 2 Name"
20925, "Variable 2 Range"
20961, "Run"
20963, "All"
20964, "Case"
20965, "DC Variable 2"
20985, "Nodes"
20986, "Voltages"
20987, "Inductors"
20988, "Currents"
20989, "Levels"
20990, "Conditions"
20991, "Power Terms"
20992, "Energy"
21200, "Starts the optimizer.\nOptimize"
21210, "Deletes this parameter."
21220, "Adds a new parameter to optimize."
21230, "Selects a parameter to optimize"
21240, "Sets whether the parameter will be optimized or not."
21250, "The parameter to be optimized"
21260, "The lowest acceptable value for the optimized parameter"
21270, "Displays the initial value of the parameter prior to the optimization."
21280, "The highest acceptable value for the optimized parameter"
21290, "The current value of the parameter"
21300, "The optimized value of the parameter"
21410, "Maximizes, minimizes, or equates the selected performance function."
21420, "Deletes this optimizing criterion."
21430, "Adds a new optimizing criterion."
21440, "Selects the performance function that is to be optimized."
21450, "The performance function to be optimized"
21460, "Specifies the branch that the optimizer is to work on."
21470, "Displays the branch that the optimizer is working on."
21480, "The value to match the performance function to if the Equates method is selected"
21490, "The current value of the performance function"
21500, "The optimized value of the performance function"
21510, "The error of the individual criterion."
21521, "When a new optimization routine starts, it will use the initial parameter values to start with."
21522, "When a new optimization routine starts, it will use the last values from the previous routine to start with."
21523, "Selects the Random mode. In this mode the program does a random search at each grid point."
21524, "Selects the Step All mode. In this mode the program evaluates once at each grid point."
21525, "Selects a starting point method."
21526, "Use a logarithmic grid for Step All and Random modes"
21527, "Keeps a text log of optimization results."
21530, "Imports values from a file to be used as Equate values with the Y_Level performance operator."
21531, "Clears all entries from the That fields."
21533, "Initial"
21534, "Existing"
21535, "Minimizes the dialog box during an optimization to better view the plot being updated."
21536, "Changes the plot values in the background to match the current optimized values."
21539, "Optimizer run time"
21541, "RMS measure of the total error."
21543, "Average percentage error of the model versus the datapoints."
21545, "Starts the optimizer."
21546, "Stops the optimizer."
21547, "Changes the circuit parameter values to the optimized values."
21548, "Sets the numeric format for values displayed in the optimizer dialog box."
21549, "Specifies success criteria for optimizer."
21550, "Invokes a dialog box that lets constraints be entered as Boolean expressions such as V(VCC)*I(VCC)<=100mW."
21551, "Get"
21552, "Random"
21553, "Step All"
21555, "Specifies the number grids to be used in the Random mode."
21558, "Specifies the number of trys at each grid point in Random mode."
21561, "Constraint specified as a Boolean expression such as V(VCC)*I(VCC)<=100mW"
23000, "This page controls which warnings will be displayed in Micro-Cap."
23001, "Enables all warnings."
23002, "Generates a warning if an edited file is closed without saving it."
23003, "Asks for permission before quitting."
23004, "Issues a warning when OPAMP supplies are added."
23005, "Issues a warning when adding GMIN resistors to resolve DC path to ground problems."
23006, "Issues a warning when the Time Range/Maximum Time Step ratio is excessively large."
23007, "Issues a warning when the number of Data Points calculated is excessively large."
23008, "Issues a warning when the Revert command is used."
23009, "Issues a warning when no AC signals are in the circuit and an AC analysis is attempted."
23010, "Issues a warning when a source is creating an excessive number of points."
23011, "Issues a warning when a part name and a node name share the same name."
23012, "Issues a warning when the SPICE3 Temp parameter is used as a device attribute."
23013, "Issues a warning when a component's Level parameter is changed where the model parameters would need to change."
23014, "Issues a warning when both TNOM and T_MEASURED have been specified for a component."
23015, "Issues a warning when a time varying expression and a model attribute are defined for a component."
23016, "Issues a warning when changing device part names that use invalid characters."
23017, "Issues a warning when multiple devices share the same part name."
23018, "Issues a warning that threads are disabled when a Leave or Retrace run is selected."
23019, "Issues a warning when generating .IC or .NODDESET statements from the State Variables Editor."
23020, "Issues a warning if an S or F variable is used in the transmission line when running any analysis besides AC analysis."
23021, "Issues a warning when one of the temperature coefficients in an R, L, or C is set to an excessive value."
23022, "Issues a warning when there are any duplicate component names after exiting the Component editor."
23023, "Enables or disables digital warnings."
23024, "Disables all warnings."
23025, "Issues a warning when the final ')' is missing."
23026, "Issues a warning when there is a purely numeric node name which could be confused with a node number."
23027, "Issues a warning about improper FFT X variables."
23028, "Issues a warning before creating a Monte Carlo circuit for the case."
23029, "Issues a warning when you make a pervasive change in Smoke."
23030, "Igrnores unknown Model Parameters."
23031, "Check for misuse of M multipiler (should use MEG multipler)"
24101, "Displays the Thumbnail Plot.\nThumbnail Plot"
24153, "This page displays general Micro-Cap option preferences."
24154, "This page displays analysis option preferences."
24155, "This page displays circuit option preferences."
24210, "Invokes the Measurements dialog box which displays results from Performance Functions or .Measure statements.\nMeasurements"
24214, "\nOptions"
24215, "\nAutosize"
24216, "\nExcel"
24217, "\nText"
24218, "\nAdd Item"
24219, "\nRemove Item"
24222, "\nDisable Item"
24223, "\nEnable Item"
24300, "Enables X Axis scaling. If disabled the X axis scale can not be changed.\nEnables X Axis scaling."
24301, "Enables Y Axis scaling. If disabled the Y axis scale can not be changed.\nEnables Y Axis scaling."
24302, "Keeps the X Axis scales of waveforms in different plot groups the same for panning, zooming, and scaling.\nKeep X Scales the Same"
24493, "Tolerance Low"
57345, "  "
57601, "Opens an existing schematic, SPICE, model library, or document file.\nOpen"
57602, "Closes the Front Window.\nClose"
57603, "Saves the active file to disk.\nSave"
57604, "Saves the active file to disk under a new name.\nSave As"
57606, "Selects print options.\nPrinter Setup"
57607, "Prints the active file.\nPrint"
57609, "Shows how the printed schematic or plot will look.\nPrint Preview"
57632, "Deletes the selected region or object without copying it to the clipboard.\nDelete"
57634, "Copies the selected region or object to the clipboard.\nCopy"
57635, "Deletes the selected region or object and copies it to the clipboard.\nCut"
57637, "Pastes the region or object in clipboard to the open window.\nPaste"
57642, "Selects everything in window or text field.\nSelect All"
57643, "Undoes the last operation.\nUndo"
57644, "Restores the last undo operation.\nRedo"
57649, "Arrange icons at the bottom of the window.\nArrange Icons"
57650, "Arrange windows so they overlap\nCascade Windows"
57651, "Arrange windows horizontally as non-overlapping tiles.\nTile Horizontal"
57652, "Arrange windows vertically as non-overlapping tiles.\nTile Vertical"
57653, "Split the active window into panes\nSplit"
59143, "Clock"
59144, "XXXXXXXXXXXXXXXXX"
59145, "LnXXXXXX"
59146, "    "
59147, "100%"
59148, "xxxxxxxxxxx"
59149, "Threads=1024"
61184, "Change the window size"
61185, "Change the window position"
61186, "Reduce the window to an icon"
61187, "Enlarge the window to full size"
61188, "Switch to the next document window"
61189, "Switch to the previous document window"
61190, "Close the active window and prompts to save the documents"
61202, "Restore the window to normal size"
61203, "Activate Task List"
61215, "Activate this window"
61402, "Open the selected item"
61440, "Open"
61441, "Save As"
61442, "All Files (*.*)"
61443, "Untitled"
61445, "Close print preview mode\nCancel Preview"
61457, "&Hide"
61472, "No error message is available."
61473, "Attempted an unsupported operation."
61474, "A required resource was unavailable."
61475, "Out of memory."
61476, "An unknown error has occurred."
61477, "Encountered an improper argument."
61696, "Incorrect filename."
61697, "Failed to open document."
61698, "Failed to save document."
61699, "Save changes to %1?"
61700, "Failed to create empty document."
61701, "The file is too large to open."
61702, "Could not start print job."
61703, "Failed to launch help."
61704, "Internal application error."
61705, "Command failed."
61706, "Insufficient memory to perform operation."
61707, "System registry entries have been removed and the INI file (if any) was deleted."
61708, "Not all of the system registry entries (or INI file) were removed."
61709, "This program requires the file %s, which was not found on this system."
61710, "This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s."
61712, "Enter an integer."
61713, "Enter a number."
61714, "Enter an integer between %1 and %2."
61715, "Enter a number between %1 and %2."
61716, "Enter no more than %1 characters."
61717, "Select a button."
61718, "Enter an integer between 0 and 255."
61719, "Enter a positive integer."
61720, "Enter a date and/or time."
61721, "Enter a currency."
61722, "Enter a GUID."
61723, "Enter a time."
61724, "Enter a date."
61744, "%1: %2\nContinue running script?"
61745, "Dispatch exception: %1"
61836, "Unable to read write-only property."
61837, "Unable to write read-only property."
61872, "No error occurred."
61873, "An unknown error occurred while accessing %1."
61874, "Attempted to write to the reading %1."
61875, "Attempted to access %1 past its end."
61876, "Attempted to read from the writing %1."
61877, "%1 has a bad format."
61878, "%1 contained an unexpected object."
61879, "%1 contains an incorrect schema."
61888, "pixels"
62177, "Uncheck"
62178, "Check"
62179, "Mixed"
62180, "One or more auto-saved documents were found."
62181, "These are more recently saved than the currently open documents and contain changes that were made before the application closed."
62182, "Do you want to recover these auto-saved documents?"
62183, "Note that if you choose to recover the auto-saved documents, you must explicitly save them to overwrite the original documents.  If you choose to not recover the auto-saved versions, they will be deleted."
62184, "Recover the auto-saved documents\nOpen the auto-saved versions instead of the explicitly saved versions"
62185, "Don't recover the auto-saved documents\nUse the last explicitly saved versions of the documents"
62186, "%s [Recovered]"
65049, "Regular"
65050, "Bold"
65051, "Italic"
65052, "Bold Italic"
}


//  
//
//         ,   ,
//  .
//           .
//           .
//
//  ,   (")     (\)  
//    .
//   :
//   1538, "Florian \"Bome\" Bmers"
//
//   ,  \n. \t  .
// ----------------------------------------------------------------------------
//    , .   Microsoft:
// http://msdn.microsoft.com/library/default.asp?url=/library/en-us/tools/tools/stringtable_resource.asp