USB Positive Overvoltage Protection Controller with Internal PMOS FET and Status FLAG
The NCP360 disconnects systems at its output when wrong VBUS operating conditions are detected at its input. The system is positive overvoltage protected up to +20 V.
Thanks to an integrated PMOS FET, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP360 is able to instantaneously disconnect the output from the input if the input voltage exceeds the overvoltage threshold (OVLO). ______
The NCP360 provides a negative going flag (FLAG) output, which alerts the system that a fault has occurred.
In addition, the device has ESD-protected input (15 kV Air) when bypassed with a 1 \iF or larger capacitor.