Даташиты

Если Вы ищете документацию на какую-либо микросхему, описание какого-либо транзистора, то в данном разделе Вы можете её скачать.

В сети

Пользователей: 38
Из них просматривают:
Аналоги: 14. Даташиты: 7. Инструкции: 1. Новости: 2. Остальное: 4. Программы: 1. Профиль пользователя: 1. Форум: 7. Чат: 1.
Участников: 3
Гостей: 35

an , Google , Яндекс , далее...
Рекорд 2375 человек онлайн установлен 26.12.2015.

Партнёры


Партнёры

Новые объявления

В настоящее время нет объявлений.

Преобразователи, стабилизаторы Преобр. напряжения : KIA3842
Отправил MACTEP. Дата добавления 25.02.2012 (3991 прочтений)

KIA3842/3/4/5AP/AF
BIPOLAR LINEAR INTEGRATED CIRCUIT


HIGH PERFORMANCE CURRENT MODE CONTROLLER
The KIA3842/3/4/5AP/AF are high performance fixed frequency current mode controller. This is specifically designed for Off-Line and DC to DC converter applications offering the designer a cost effective solution with minimal external components. This integrated circuit feature a trimmed oscillator for precise duty cycle control, a temperature compensated reference, high gain error amplifier, current sensing comparator, and a high current totempole output ideally suited for driving a power MOSFET. Also included are protective features consisting of input and reference undervoltage lockouts each with hysteresis, cycle-by-cycle current limiting, programmable output deadtime, and a latch for single pulse metering. Differences between members of this family are the under-voltage lockout thresholds and maximum duty cycle ranges. The KIA3842A and K1A3844A have UVLO thresholds of 16V(on) and lOV(off), ideally suited off-line applications The corresponding thresholds for the KIA3843A and KIA3845A are 8.5V and 7.9V. The KIA3842A and K1A3843A can operate to duty cycles approaching 100%. A range of the zero to <50% is obtainedby the KIA3844A and KIA3845A by the addition of an internal toggle flip flop which balanks the output off every other clock cycle.

Оценка: 10.00 (1 vote) - Оценить | Править описание | Сообщить о нерабочей ссылке | Рассказать другу | Комментарии (0)

Разное

Интересно

При первом включении после ремонта (для двухтактных УНЧ):
1. в разрыв "+" и "_" резисторы около 100 Ом для ограничения тока в случае не полного устранения неисправности.