Single Channel 256 Tap DPP™ with Integrated EEPROM and l²C Control
The CAT5140 is a single channel non-volatile 256-tap digitally programmable potentiometer (DPP™). This DPP is comprised of a series of equal value resistor elements connected between two externally accessible end points. The tap points between each resistive element can be selectively connected to the wiper output via internal CMOS switches forming a linear taper electronic potentiometer.
The CAT5140 contains a volatile wiper register (WR) and an 8-bit non-volatile EEPROM for wiper position and 5 additional non-volatile registers for general purpose data storage. Programming of the registers is controlled via I²C interface. On power up. the wiper position is reset to the most recent value stored in the non-volatile memory register (IVR).
The CAT5140 is available in an Pb free, RoHS compliant S-lead MSOP package, and operates over the industrial temperature range of -40°C to +85°C.