Даташиты

Если Вы ищете документацию на какую-либо микросхему, описание какого-либо транзистора, то в данном разделе Вы можете её скачать.

В сети

Пользователей: 89
Из них просматривают:
Аналоги: 52. Даташиты: 15. Инструкции: 1. Новости: 2. Остальное: 6. Профиль пользователя: 5. Форум: 7. Чат: 1.
Участников: 3
Гостей: 86

Google , wolf170571 , Яндекс , далее...
Рекорд 2375 человек онлайн установлен 26.12.2015.

Партнёры


Партнёры

Новые объявления

В настоящее время нет объявлений.

Драйверы Драйверы светодиодов : LT3756
Отправил MACTEP. Дата добавления 25.02.2013 (1917 прочтений)

100VIN, 100VOUT LED Controller
Открыть изображение в новом окне


Features
■ 3000:1 True Color PWM™ Dimming
■ Wide Input Voltage Range: 6V to 100V
■ Output Voltage Up to 100V
■ Constant-Current and Constant-Voltage Regulation
■ 100mV High Side Current Sense
■ Drives LEDs in Boost, Buck Mode, Buck-Boost Mode, SEPIC or Flyback Topology
■ Adjustable Frequency: 100kHz to 1MHz
■ Open LED Protection
■ Programmable Undervoltage Lockout with Hysteresis
■ Improved Open LED Status Pin (LT3756-2)
■ Frequency Synchronization (LT3756-1)
■ PWM Disconnect Switch Driver
■ CTRL Pin Provides Analog Dimming
■ Low Shutdown Current: <1(jA
■ Programmable Soft-Start
■ Thermally Enhanced 16-Lead QFN (3mm x 3mm) and MSOP Packages

Applications
■ High Power LED Applications
■ Current Limited Constant Voltage Applications
■ Battery Charging

Description
The LT®3756, LT3756-1 and LT3756-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low side external N-channel power MOSFETfrom an internal regulated 7.15V supply. The fixed frequency, current-mode architecture results in stable operation over a wide range of supply and output voltages. A ground referenced voltage FB pin serves as the input for several LED protection features, and also makes it possible for the converter to operate as a constant-voltage source. A frequency adjust pin allows the user to program the frequency from 100kHz to 1MHz to optimize efficiency, performance or external component size.
The LT3756/LT3756-1/LT3756-2 sense output current at the high side of the LED string. High side current sensing is the most flexible scheme for driving LEDs, allowing boost, buck mode or buck-boost mode configuration. The PWM input provides LED dimming ratios of up to 3000:1, and the CTRL input provides additional analog dimming capability.

Оценка: 0.00 (0 votes) - Оценить | Править описание | Сообщить о нерабочей ссылке | Рассказать другу | Комментарии (0)

Разное

Интересно

Для выпаивания микросхем в DIP корпусе пользуюсь проверенной технологией . Которая дает неплохие результаты , сохраняя при этом как микросхему так и дорожки печатной платы .

Случайные новости