Отправил alexfloka.Дата добавления 15.02.2011 (3046 прочтений)
IRIS-W6753 Features • 6-pin SIP type full molded package, optimum IC for low-height SMPS, with distance between high and low voltage pin 1.8 mm with pin elimination. • Oscillator is provided on the monolithic control with adopting On-Chip Trimming Technology • Small temperature characteristics variation by adopting a comparator to compensate for temperature on the control part. • Low start-up circuit current (100uA max) •Avalanche energy guaranteed MOSFET with high VDSS The built-in power MOSFET simplifies the surge absorption circuit since the MOSFET guarantees the avalanche energy. No VDSS de-rating is required. • Built-in constant voltage drive circuit • Built-in step drive circuit • Built-in low frequency PWM mode (22 kHz) • UVLO Burst Standby • Two operational modes by auto switching functions according to load For middle~heavy load operation : QR mode For light~middle load operation : 1 Bottom Skip mode • Various kinds of protection functions Pulse-by-Pulse OvercurrentProtection (OCP) OvervoltageProtection with Latch mode (OVP) Overload Protection with Latch mode (OLP) The maximum limit of on-time
Для выпаивания микросхем в DIP корпусе пользуюсь проверенной технологией . Которая дает неплохие результаты , сохраняя при этом как микросхему так и дорожки печатной платы .